- BrandИзотех и Ко
- Country of manufactureUkraine
- Wattage5 kW
- Pipe materialSteel
The developed length of L = 300... 3000 mm
Diameter of d = 8,5; 10; 13 mm
Diameter of fins is D = 23; 25,3; 29 mm
Power is up to 5 kW
Tension 12... 600 V
Tube material - steel corrosion-proof or carbonaceous
Fins material - stainless steel
Tubular electric heaters with fins (TENR) are used, generally for heating of moving or quiet air and are used in industrial and household electroheaters, convectors, heat guns and in other installations. Less often orebrenny TENY are applied to heating of liquids.
The design of TENR represents the two-trailer tubular electric heater of round section with the fins, skintight to its active surface, executed from a steel corrugated tape of TENA wound on a cover on a spiral.
The internal design of the orebrenny electric heater is similar to a design of two-trailer TENA.
* L - the developed length;
* Lo - fins length;
* D - diameter of a cover;
* Do - diameter of fins;
* h - a fins step.
TENR identification number:
Orebrenny TENY — a symbol
The fins allow to increase surface area and, as a result, to increase watt loading of the electric heater by 2 - 2,5 times.
TENR can be equipped with the mounting in the form of the unions, levels, etc. connected to a cover by method of welding, the soldering or pressing and intended for fastening of heaters in the completed installations.
TENR can be direct and bent (most often in one plane). Tubular TENY electric heaters, TEN-45, TEN-51, TEN-67 models