Ukraine
The tool on concrete, drills buy in Kharkov
Buy The tool on concrete, drills
The tool on concrete, drills

The tool on concrete, drills

In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Non-cash,
  • Visa/Mastercard,
  • Cash on delivery
  • In detail
Shipping:
Ukraine, Kharkov
Description

Our company is ready to provide the huge range of the tool on concrete, a brick, a tile, asphalt, sandstone, the reinforced concrete and other material. For various type of the tool such as the Bulgarian, the Drill, the Puncher, Diamond machines, etc.

The short range of raskhodnik for the tool:

The drill on SDS MAX concrete

The crown is universal

Crowns on concrete with a shaft

Shafts for a crown on concrete

Drill shock on concrete

Diamond detachable disks

Disks diamond "TsENTROINSTRUMENT" (Russia)

Disks diamond STERN (Austria)

Disk diamond TIP (China)

BUr — the cutting tool for making of openings in solid materials — concrete, a stone, a brick. In life and construction is a main type of equipment for the puncher.

It is structurally similar to a drill, has a shaft, a spiral for branch from a zone of drilling of the destroyed material (the cavity in the drill in a complex with system of vacuum dust removal very seldom is for this purpose used). The cutting part of the drill is made of a firm alloy, can have various configuration of sharpening and various quantity of the cutting edges. For firmness increase the cutting edge is done not sharp, as at a drill, and a little rounded. Unlike a drill the drill has on a shaft special elements for fastening in the boss of the puncher (dredging or ledges).

There are several designs of a shaft of the drill. The SDS+ and SDS-max standards which differ in diameter of a shaft (10 mm and 18 mm respectively), and also quantity and the amount of the dredging transferring the rotating moment and providing fixing of a nozzle in the boss of the puncher are most distributed.

Basic purpose — drilling with blow (therefore the drill is not applied to drilling of fragile materials). Application material — concrete. Drilling of a brick by means of the drill is not always economically justified, and sometimes is technologically inadmissible, in particular, when drilling in a hollow brick of an opening under an anchor or the expansion bolt shield.

The drill, unlike a drill, has to move freely with a certain amplitude along the axis in the boss of the puncher (for example, the drill SDS moves approximately to 1 cm). Before fixing in the boss special greasing for decrease in losses of power and increase in a resource of the drill and the boss is applied on a shaft of the drill.


During the work as drills with length more than 460 mm the preliminary zasverlivaniye the drill of the same diameter about 150 mm long is obligatory. If it is expedient to carry out the drill 600 — 1000 mm long, then drilling in 3 steps.

Besides drills we have expendables:

Crowns on concrete with a shaft

Shafts for a crown on concrete

On concrete you can get acquainted with the range of cutting diamond wheels in the section the diamond tool.

Shipping method
Payment method
Contact the seller
The tool on concrete, drills
The tool on concrete, drills
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0