The block machine is mobile installation for production of two masonry units (slag stones or wall stones) for once. Installation is applied to industrial and private production of masonry units.
The industrial vibrator fastens to heavy plate, and they create vibroeffort to slag stone, at the same time quality of pressing of the block turns out the highest.
Algorithm of work on The Block — the Machine-2 machine:
1. Have prepared harsh concrete moist mix. Usually the composition of mix is 5 parts of elimination, one part of cement and floor of part of water. But there is large number of structures of which it is possible to manufacture blocks, the main criterion is what is in your territorial region. We prepare solution in concrete mixers for moist mixes.
2. We load two-section form by means of shovel ready mix, post of it we carry out consolidation of mix with the help of the vibrator, and we do mix dosypka in form.
3. After that we make vibropressing.
4. By means of the lever and vibration we lift matrix above blocks where it is fixed.
5. We move to width of two blocks back. thus blocks short flight of stairs remain on our site. But it is better, as they say once to see - therefore surely watch video of work. Thanks to the fact that we have solution - rigid blocks are not scattered. The set of durability of slag stone occurs in usual temperature conditions, but time it can be reduced I use special construction additives (setting agents for concrete)
The main advantages of slag stones are low cost, low cost value of the block, high speed of construction, At laying of walls of solution is necessary twice less. One slag stone replaces six pieces of red brick.
|Device type||mobile bezpoddony|
|Products type||masonry units 390*190*190mm with three round emptiness|
|Productivity, piece/hour||50... 55 (400 blocks in change)|
|Rated capacity of the electric drive||0.25kvt.|
|Tension of the feeding power supply network||In - 220 single-phase household.|
Overall dimensions of the mechanism, mm.