- Country of manufactureRussia
- Plant manufacturerТехнокар
Techno the Vector 6 3D stand convergence disorder without restrictions!
Distinctive features of the Techno Vector 6:
allows installation in small rooms (there are no restrictions on distance between the elevator and frontal wall);
measurement and adjustment can be carried out at any height of the elevator;
there is no binding to workplace;
does not demand mounting.
Principle of work
Cameras at the same time come into the view the measuring targets located on front wheels of the car and referensny targets. Determination of coordinates of position of cameras and targets in space is made, on the basis of these data calculation of wheel alignment angles is made.
Since all measuring system fits into the sizes of the elevator and rises and falls together with the car, adjustment can be made at any height, and columns of the elevator do not block field of vision of cameras.
Installation of the stand
Installation of the stand of the Techno the Vector 6 does not demand installation works. The disorder convergence stand is not attached to defined podjemnikuit to workplace, it is enough to transfer shaft with referensny targets, measuring targets and block cameras and the stand is ready to work on the new place.
Compensation of beating of disks
The "compensation of beating of disks" procedure is carried out by method of rolling of the car, it is enough to give a ride to the car ~ on 40 cm, and this procedure will be executed.
The Techno stand the Vector 6 can become the ideal decision both for large servicing stations of cars, and for the small car services aiming even to use in the small production room modern stands with the 3D technology.
Description of stands of the Techno Vector 6
Techno stands the Vector 6 FREE MOTION are intended for measurement and adjustment of installation angles of the managed and uncontrollable wheels of cars in the conditions of the motor transportation enterprises, service stations, automobile plants and the diagnostic centers.
Stands contain the following basic elements:
1. Computer rack
ergonomic working control panel;
wireless control board;
modern, high-speed processor;
color large-format monitor;
color inkjet printer;
the software of the Techno the Vector with three-dimensional visualization.
2. Self-centering wheel adapters.
Self-centering wheel adapters work with the broad range of the sizes of rims from 12" to 24" and are compatible to disks of passenger and light trucks.
3. Measuring targets.
The passive reflectors without the maintenance of electronic elements consisting from:
flat targets with gradient drawing, covered with protective layer;
the strong udaro-protected body.
4. Shaft with referensny targets.
Shaft with passive reflectors without the maintenance of electronic elements, consisting from:
shaft for fastening of targets;
flat targets with gradient drawing covered with protective layer;
the strong udaro-protected body.
5. Block cameras.
Video cameras of high resolution provide fast and reliable determination of coordinates of targets in space and information transfer in the personal computer on Wi-fi channel.
6. Software Vector 3D
Operating system - license Microsoft Windows.
The three-dimensional interface of the program allows to trace in real time situation and wheel alignment angles of the car on the screen.
Intuitively clear interface in combination with expanded help system helps even to unprepared users to master quickly the stand and to get to work.
In the software the most modern mathematical algorithms considering even the slightest distortions of the image brought by optical system are used.
The software includes expanded control system of reports.