Buy Stationary belt conveyor (closed) U10-KLZ-200
Stationary belt conveyor (closed) U10-KLZ-200

Stationary belt conveyor (closed) U10-KLZ-200

Products from producer
In stock
Reconfirm the price with seller
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Russia, Kropotkin
(View map)
Display phones
10 years on Allbiz
Quickly responds
Technical characteristics
  • BrandЭлеватормельмаш
  • Country of manufactureRussia

Closed belt conveyor U10 - KLZ - 200 is designed for horizontal movement of oilseeds, grain and products of its processing and other bulk cargo at a distance of up to 100m.

The closed belt conveyor can be installed both indoors and outdoors.

The closed belt conveyor can be used to work at creameries, elevators, grain receiving points, as well as in other places for mechanical movement of bulk materials.


The main parameters and dimensions of the closed belt conveyor are shown in the table:

No. The name of indicators Unit rev. Value
1 Performance t / h 200
2 Belt width mm 650
3 Belt speed m / s 2
4 Tension stroke mm 400
five Middle section length mm 1500 and 3000
6 Product discharge height mm 600
7 Installed capacity kWh thirty
eight dimensions - -
is long mm 101920
width mm 1150
height mm 1050

Product structure and delivery set

Conveyor U10 - KLZ - 200 consists of the following main units:

  • Drive section with gear motor.
  • Tension section.
  • Medium section.
  • Transport belt.
  • Racks.
  • Clamps, clamps, hardware, gaskets.

Belt conveyor device.

The conveyor is a stationary transporting device of continuous action with a working traction element - a conveyor belt moving along rollers (coils).

The drive section is a structure assembled from separate assembly units. The rotation of the drive drum is carried out by a motor - reducer with a hollow shaft and keyed connection, suspended on the shaft. The geared motor is secured against turning by a torque rod with a damping sleeve.

The tension section is a structure assembled from separate assembly units. The device is telescopic. The conveyor belt is tensioned by four tensioning screws.

The middle section is a structure assembled from separate assembly units consisting of walls, a bottom and rollers in the form of a "coil".

The principle of the belt conveyor.

When the section is switched on, the driven conveyor belt moves along the rollers, transporting the product entering it through the loading chute installed on the middle section. The number of loading trays depends on the technological scheme of production. The discharge of the product takes place at the turn of the belt around the drive drum. The total length of the conveyor depends on the number of center sections installed in the line.

Benefits compared to other suppliers

  • Operation of the conveyor in an open area is possible, because the construction of the conveyor is hermetically sealed, does not allow moisture, dust to enter the transported product.
  • Elimination of dusting of the transported product.
  • All bearing assemblies are located outside the conveyor sections. In this regard, it is possible to monitor the temperature of the bearings and the availability of their maintenance.

Closed belt conveyor U10-KLZ-200 drawing

Contact the seller
Stationary belt conveyor (closed) U10-KLZ-200
Stationary belt conveyor (closed) U10-KLZ-200
Shipping method
Payment method
ClearSelected items: 0