Rotor feeders of BL MZC 150
Rotor feeders of BL MZC 150, with a productivity of rotor up to 2,5 l / about for installation in a section in pneumoroute pipes. The rotor is made sliding on guides. Are made of stainless steel, cast iron and aluminum. Round - the top flange. The taken-out bearing knots. Selection of a complete set according to a task. Pressure difference an input and output to 1,5 bars. Temperature is up to 150? S. Dostupno execution of ATEX.
Rotor feeders BL - MZC-150 with a sliding rotor are made for installation in a pneumoroute pipe section, with a productivity of 2,5 liters for one turn of a rotor (at 100% filling). Are intended for rated loading / unloading of the powdery and granulated products.
Rotor feeders of BL - MZC - are applied in systems with pressure difference an input and output to 1,5 bars and have small losses of air through a gap the rotor/case that allows to use them in systems of pneumotransport.
Thanks to a modular design of a rotor feeder, using standard accessories, production of various configurations for application in various industries, such as food, chemical and pharmaceutical is possible.
The rotor is made sliding, on guides, for fast and high-quality sanitary cleaning of a feeder that guarantees the high level of safety of service personnel. Accuracy of extraction of a rotor allows not to damage at the same time the case of a feeder and blades of a rotor. The standard rotor has 9 fixed blades.
Rotor feeder (lock feeder, the lock valve, lock lock, sector lock, the lock batcher) (prosypny) type through passage with an open lower flange. BL feeders - MZC - have a round top flange. The slanted arrangement of an entrance opening increases coefficient of filling of a rotor with a product.
The rotor shaft bearings which are taken out, the closed type with greasing on all service life.
Consolidation of a shaft is carried out by means of epiploons or omental consolidation with podduvy compressed air is used.
Feeders are made of stainless steel 316, cast iron and aluminum. Production options with a nickel, chromic and tungsten covering are available.
Models of a standard complete set work at a temperature up to 150 °C.
Rotor feeders can be made according to the certificate of USDA Dairy for use in food and pharmaceutical industry, and in the versions corresponding to the directive EC 1935/2004. -
Versions - production of rotor feeders in explosion-proof execution corresponding are available including to the certificate of ATEX 94/9/EC, maintaining short-term pressure difference to 10,0 bars and for work in fire-dangerous rooms of the class St2.
Rotor feeders of AL - MZC - can be equipped with the direct or chain drive.
The configuration of a rotor feeder and the drive is carried out on the basis of requirements of the specification or inquiry.