- BrandИНТЕР АГРО
- Country of manufactureUkraine
Rotor feeders of BL 250/BXL 300
Rotor feeders of BL 250 -/ BXL-300, with a productivity of rotor up to 19,0 -л / about for installation in a section in pneumoroute pipes. Are made of stainless steel, cast iron and aluminum. The BXL version with the increased diameter of a flange. Round top flange. The taken-out bearing knots. A complete set according to a task. Pressure difference an input and output to 2,0 bars. Temperature is up to 150? S. Dostupno execution of ATEX.
Rotor feeders of BL 250 -/ BXL-300 are made for installation in a pneumoroute pipe section, with a productivity of 19,0 - liters - for one turn of a rotor (at 100% filling). Are intended for rated loading / unloading of the powdery and granulated products.
Rotor feeders of BXL with the increased size of the top flange are specially developed for applications when the size of a flange or, for example, is important for increase of coefficient of loading of a rotor products with a bad fluidity.
Rotor feeders of BL/BXL are applied in systems with pressure difference an input and output to 2,0 bars and have small losses of air through a gap the rotor/case that allows to use effectively them in systems of pneumotransport.
Rotor feeder (lock feeder, lock valve, lock lock, sector lock, lock batcher) of produvny type. In the lower part of the case on lateral covers has flanges for installation in a rupture of a pipe of pneumotransport, in top – a round flange. Flange connection according to PN10, ANSI 150lbs and JIS.
The slanted arrangement of an entrance opening increases coefficient of filling of a rotor with a product.
Thanks to a modular design of a rotor feeder, using standard components, production of various configurations for application in various industries is possible.
Rotor feeders of BL/BXL are made of AISI 316 stainless steel, cast iron and aluminum. Production with the nickel, chromeplated and tungsten covering is possible. The standard rotor has 9 fixed blades. Various configurations of a rotor are possible: with adjustable blades, the lowered productivity, with scrapers, etc.
The rotor shaft bearings which are taken out, the closed type with greasing on all service life.
Rotor feeders of BL/BXL have omental consolidation of a shaft with podduvy compressed air.
Models of a standard complete set work at a temperature up to 150 °C and the maximum pressure difference an input and output to 2,0 bars. Versions - production of rotor feeders in explosion-proof execution corresponding are available including to the certificate of ATEX 94/9/EC, maintaining short-term pressure difference to 10,0 bars and for work in fire-dangerous rooms of the class St2.
Additional openings for removal of excess air – standard execution of versions of production from cast iron and as an option for stainless steel and aluminum are provided in the case of a rotor feeder. By default on rotor feeders the direct SEW drive is installed, other drives can be installed on demand. The configuration of a rotor feeder and selection of the drive (direct, chain, pneumatic, hydraulic) is carried out on the basis of requirements of the specification or inquiry.