- Country of manufactureUkraine
Rotor feeders of AL Dairy 350
Rotor feeders of AL Dairy 350, with a productivity of rotor up to 58,0 l / about, are made of stainless steel 316/316L. The quick-detachable polished rotor. Round lower and top flange. The taken-out bearing knots. Selection of the drive and a complete set according to a task. Pressure difference an input and output to 2,0 bars. Temperature is up to 80? S. Dostupno execution of ATEX.
Rotor feeders of AL Dairy 350 - with a productivity of 58,0 - liters for one turn of a rotor (at 100% filling), are intended for rated loading / unloading of the powdery and granulated products. Rotor feeders of AL Dairy 350 - are intended for use in the food, chemical and pharmaceutical industries, in production of forages for animals where very high standards of production are applied. The rotor is made sliding for fast and high-quality sanitary cleaning of a feeder. Rotor feeders of AL Dairy 350 - are made according to the certificate of USDA Dairy for use in food and pharmaceutical industry, and in the versions corresponding to the directive EC 1935/2004. Are applied in systems with pressure difference an input and output to 2,0 bars. Rotor feeders have small losses of air through a gap the rotor/case and will be suitable for use in systems of pneumotransport. Rotor feeder (lock feeder, the lock valve, lock lock, sector lock, the lock batcher) of type through passage with an open lower flange. The slanted arrangement of an entrance opening increases coefficient of filling of a rotor with a product. Thanks to a modular design of a rotor feeder, using standard components, production of various configurations for application in various industries is possible. Feeders of AL Dairy 350 - have round lower and top flanges of an identical standard size. Flange connection according to PN10, ANSI 150lbs and JIS. The case and covers are manufactured of AISI 316 stainless steel (DIN 1.4408). The standard rotor has 9 fixed blades. The rotor is made of AISI 316L stainless steel (DIN 1.4404). Pockets of a rotor are rounded off and polished to Ra=0,8? m (150 grit). Internal and external mirror polishing of a feeder is possible. The rotor shaft bearings which are taken out, the closed type with greasing on all service life. Consolidation of a shaft is carried out by means of epiploons or epiploons with podduvy compressed air. Models of a standard complete set work at a temperature up to 80 °C and the maximum pressure difference an input and output to 2,0 bars. Versions - production of rotor feeders in explosion-proof execution corresponding are available including to the certificate of ATEX 94/9/EC, maintaining short-term pressure difference to 10,0 bars and for work in fire-dangerous rooms of the class St1 and St2. By default on rotor feeders the direct SEW drive is installed, other drives can be installed on demand. The configuration of a rotor feeder and selection of the drive (direct and chain, pneumatic and hydraulic) is carried out on the basis of requirements of the specification or inquiry.