- Country of manufactureUkraine
- Forced ventilationNo
- Humidification of airNo
- Ventialtion modeNo
- Night modeNo
Installation decentralized forced-air and exhaust ventilating system (heat recuperator) PRANA is at the same time investments into energy saving and ensuring thermal comfort. Controlled compulsory ventilation promotes improvement of qualitative composition of air in the room (oxygen level increases, CO2 decreases, there is a vital energy of the nature prana) that positively affects the general health and a state of health. Besides, humidity level indoors becomes optimum, there is no mold and fungi which are unhealthy the person are not multiplied and destroy building constructions of the building.
Principle of work of a recuperator PRANA
Air streams pass through system of the copper heat exchangers located in the working module, at the same time are divided among themselves both in the working module, and on "entrance exit" and do not mix up. In the ventilating PRANA system warm otrabotynny air which is removed from the room heats the cold air getting outside. In the summer on the contrary - cools.
The system has no filters, and copper heat exchangers provide disinfecting of air that air ducts direct-flow, and their length small, remains ionic composition and a natural power component of air to "prana". As result: "PRANA" not only airs the room, and also provides with enough previously pronrety "street" air which is oxygenated also by natural ions. Besides this system allows to lower significantly costs of heating of housing in the winter and coolings with summer thanks to the effective heat exchanger.
A semi-industrial series of "PRANA-200S" is developed for the purpose of ensuring the big area with ventilation of rooms and/or with special service conditions, started in a mass production with the corresponding technical properties. This model is applied on objects of production industrial function (plants, shopping centers, sport and recreation complexes, pools, rooms of an agricultural sektorv, etc.).
Diameter of the working module - 200 mm;
Length of the working module - from 560 mm;
Air exchange volumes at recovery:
inflow: 235 m3/hour,
In the night mode of-40 m3/hour;
Electricity consumption - from 12vt/hour to 54vt/hour depending on an operating mode;
Control system: panel of distatsionny management or dimeasures (rheostat).
Function "pass reheating" allows to expand the temperature range of use of systems of ventilation PRANA to - 25C (-30C). Function can independently work, irrespective of operation of fans and joins/is switched off with PDU. Under an operating condition of extreme temperatures function will prevent frosting of the external fan. In the passive mode the system can be used as a thermal veil. In the night mode of work of a recuperator "mini-reheating" in addition increases temperature of stitched air on 6-7C.
Main advantages of a recuperator PRANA:
Compact dimensions, depending on thickness of walls.
Copper heat exchanger: first, the remarkable heat transfer secondly is inherent in copper, thanks to the fact that copper is an anti-septic tank (it is as close as possible to silver) in a recuperator the environment providing air disinfecting, i.e. viruses is created, bacteria, microbes lose viability.
The efficiency to 78% is reached due to passing of counter exhaust and stitched air flows, are not crossed among themselves, through system of copper heat exchangers (recuperators);
Speed and ease of installation, without expendables, availability and a prostate of service, a maximum level of electricity consumption from 32vt-310vt, depending on model. A convenient and simple control system, silent at the night mode (a household series), the guarantee period 2 years.