- Type of pumpAxial-piston
with a productivity from 57 l/min to 200 l/min, are applied in rolling mills, automatic molding machines, hydraulic pressa, metallurgical industry. Are intended for work on mineral oils by viscosity from 21 to 265 mm ² / with (cSt) at a temperature of oil from +10 to +50 °C and ambient temperature from 0 to +50 °C. The recommended working liquids: mineral oils like VNII NP-403, IGP-30 and IGP-38.
Pumps ON are intended for application in hydraulic actuators, the corresponding GOST 17411 and working with a nominal pressure of 32 MPas where the adjustable stream of working liquid with the constant direction is required.
In the axial and piston pump the gear pump creating the stream of working liquid pressure up to 2,5 MPas intended for management of knots of hydraulic actuators is built in.
Are issued with mechanisms to giving changes: manual (R), watching (C), hydraulic (), the regulator of the power (D1), electromagnetic (M).
Technical characteristics of axial and piston pumps ON … 74M
|Standard size||Characteristic||Dimensions in mm||Weight, kg|
|Giving (expense), l/min||Pressure, MPa||Rotation frequency, with-1||Power, kW||Length||Width||Height|
Basic execution of pumps - flange. Pumps with a working capacity of 90 and 224 cm ³ can be manufactured with fastening on paws, in this case in designation of the pump there is no letter "F".