- Country of manufactureBelarus
It is intended for priming and leveling the absorbency of the walls and ceilings before applying water - dispersion paints for interior and exterior use.
Primer can be used both for internal and for external works.
|one||Appearance primer||Unclear - white liquid|
|2||Mass fraction of solids, %||20 ± 1|
|3||Hydrogen ion concentration, pH||6.0 - 9.0|
|4||Drying time to degree 3 at (20,0 ± 2) ° C, h, max||one|
Advantages: Primer practically odorless, reduces absorbency paintable base facilitates the subsequent application of paint layers and ensures their uniform coating. Reduces the ink consumption and provide its strong adhesion to the base, economical and environmentally friendly.
The primer used for interior and exterior work.
Surface preparation: Before applying the primer with facades mechanically removed moss, tar spots. Surfaces having efflorescence necessary clean dry method (brushing). In operation the surfaces of this type can not ensure the durability of the coating, because of possible repeated appearance of salt deposits and, in consequence, the violation coating adhesion to the substrate.
The surface must be clean, dry, solid, exhibit good load bearing capacity and does not contain substances which reduce adhesion (release agents).
Fresh mineral surfaces (plaster, putty) before priming concrete should be conditioned for at least 28 days at a temperature not below 10 ° C, the allowable residual moisture bases - not more than 8% .
The old surface, previously painted with mineral paints, loosely hold the coating, peeling of the base, chalk or lime, chalk coating must be completely removed (washing machines under high pressure or by mechanical means). After wet cleaning is necessary to give the ground to dry well. Peeled surface and coating defects must align plaster solution or polymeric fillers, sanded and cleaned of abrasive residues. Glossy concrete surfaces must be treated mechanically to give them a surface roughness (surface should be matte).
Panelists metal parts (valves, nail heads, etc. ) necessary to clean rust and paint primer that will protect from rust and thus prevents the appearance of rust spots under paint. For these purposes, it is recommended to use a primer "Akvapraym" (TU BY 500021625.125), or primer "LidAkril" (TU BY 500021625.124), or primer enamel "Ekolyuks" (TU BY 500021625.145).
Coating: Primer stirred and diluted with water before use. Primer recommended dilution with water in a proportion of 1 to moderately absorbent surfaces: 1 for highly absorbent surfaces - 2: 1.
The primer is applied with brush, roller or brush in one - two layers (depending on the absorbency of the surface) at ambient temperature and the surface from plus 7 ° C to plus 35 ° C, under favorable weather conditions, i. e. in the absence of rain, strong wind or fog. After the rain hold staining should only after 2 - 3 days exposure surface at a temperature not lower than 15 ° C. Deviation from these recommendations may occur deterioration of performance and processability applying primers.
Drying Time coats at least 2 hours at ambient temperature (20 ± 2) ° C and a relative humidity of 65% .
When reducing the temperature or humidity change primer drying time is increased to 4 hours.
Consumption of 100 - 125 g / m2, depending on the roughness, the porosity, absorbency of the substrate, the application method, etc. painter qualification factors. . More precisely flow is determined by applying a test coating.
When priming textured and highly absorbent surfaces rate can reach 200 g / m2.
Subsequent layers of paint applied after 2 hours at a temperature of (20 ± 2) ° C and a relative humidity of 65% .
Not be mixed with other primer paints and solvents of any type. Diluted with water only. Tool and containers should be washed with water at least in 10 - 15 minutes after application. After using the primers as intended containers with residues of the product must be tightly closed closures and sent to the consumer landfill
Storage: The primer must be stored indoors at a temperature from + 5 ° C to plus 35 ° C. Do not allow direct sunlight. In winter, the primer must be transported in insulated truck.
Precautions: Priming fire and explosion. Persons related to the paint work must be provided with personal protective equipment (overalls, safety glasses, rubber gloves). In case of contact primer eyes, mucous membranes and skin and plenty of water.
The dried coating has no toxic effects on the human body