Pipes from polyethylene for gas of high density of PE-80 with a diameter from 20 mm to 400 mm which are intended for transportation of combustible gases by pressure up to 0,6 MPas (6 atm) according to requirements of DSTU B B.2.7-73-98, are intended for construction and repair of networks of gas supply. Combustible gases are used as raw materials and fuel industrial and komunalno - household value. Pipes passed certification in institute of electric welding of E. O. Patton NAN of Ukraine, are approved by the state committee of construction, architecture and housing policy of Ukraine, and also JSC Kiyevoblgaz. Committee on supervision of labor protection of Ukraine (Gosnadzorokhrantrud) the given permission to a mass production of polyethylene pipes for construction of gas pipelines. Pipes are issued black color with longitudinal yellow strips pieces from 5 to 14 meters, and also in bays of different length.
Products of other enterprises
Pipes polyethylene water pressure head are used at construction or reconstruction of the external pipelines pumping water for housing and communal services and also industrial consumers. Polyethylene pipelines can transport other gaseous and liquid connections against which such material as polyethylene is chemically steady. Pipes are issued from polyethylene of low pressure of high density of PND (HDPE) of classes PE 100+, PE 100, PE 80 and PE-63. The dimensional relations are established by the standard as SDR 41 - SDR 6, the range of nominal diameters is established from 20 mm to 1200 mm with the main working pressure 2.0; 1.6; 1.25; 1.0; 0.8; 0.6; 0.4 MPa. Color of pipes has to be black with blue marker strips. The pipes made of polyethylene of low pressure of the high density (PND) are issued in direct pieces from 110 mm to 1200 mm with the established length of 12 m. Production with a diameter less than 110 mm is made bays from 50 m to 1000 m long.
Contact the seller
Pipes PE for water and gas
We recommend to see