- Country of manufactureUnited Kingdom
Anticorrosive, molotkovy and smooth paint on the basis of synthetic pitches for ferrous and non-ferrous metals, wooden surfaces, plastics with the firm invoice.
Color: brown, black, golden, copper, gray, silver-gray, dark green, white, blue, lime, dark blue, red.
Quick-drying, 3 in 1: anticorrosive soil, underlayer and finishing covering at the same time. Dirt-resistant covering.
Scope: In inhabited and non-residential premises with the moderated and increased humidity. Also can it is applied on wooden and plastic surfaces with the firm invoice.
Theoretical expense of 8 - 10 sq.m/l.
Dry rest of 50% nominally.
Density is 0,96 - 1,10 kg/l.
Cleaning of tools thinner Solvent and cleaner of Hammerite.
Way of drawing
To apply paint with a brush, the roller or dispersion See also instruction for application.
Drying time at +23 C and otnos. vlazhn. 50%
On came unstuck – 1 - 2 h.
Full drying – 4 h.
Luster Glossy (80)
Heat resistance from-20ºС to +80ºС.
Short-term heat resistance to +150ºС.
Thickness of a dry film is 100 microns
To PROTECT restriction FROM FIRE.
Adhesion Conforms to the standard 1 BS 3900 E6.
Crash-worthiness of 15 cm of BS3900, E7
Packing of 0,25 l, 0,75 l, 2,5 l, 5 l, 20 l
Storage 2 years at t ° from +5 °C to +30 °C.
INSTRUCTION FOR APPLICATION
Previously to process a rusty surface a metal brush for removal of unsteadily keeping particles. It is recommended to put in two layers. Temperature condition when drawing: from +8ºC to +30ºC, humidity of air of 85%. Before application carefully to mix. After full hardening paint is steady against splashes of the diluted acids and alkalis (most 10% solution), gasoline, diesel fuel and other substances applied in construction. If necessary previously to ground the new or completely cleared surfaces a special priming covering.
Full compliance of this covering to technical parameters is reached after completion of process of formation of a firm phase.
Structure Pigment: Inorganic pigments without compounds of lead.
Binding: The alkyd resins modified by polystyrene.
Thinner: Solvent and cleaner of Hammerite.
Dilution Drawing by a brush: Dilution is not required. To put in 2-3 thick layers, avoiding potyok.
Drawing by the roller: To dilute up to 10% with the Hammerite solvent. To put in 2-3 thick layers, avoiding potyok.
Dispersion: Usual dispersion: To dilute up to 15% of Solvent and the Cleaner of Hammerite to paint volume - is suitable for the majority of the equipment. Pressure in a spray 2 – 2,1 atm. Put 3 – 4 layers, avoiding potyok.
Airless dispersion: To dilute up to 15% with Solvent and the Cleaner of Hammerite to paint volume. Pressure in a spray 170 – 175 atm., diameter of a nozzle is 0,38-0,51 mm. Put 2 – 3 thick layers, avoiding potyok.