- Country of manufactureUkraine
Mobile x-ray devices
The Villa Sistemi Medicali plant has a big portfolio of mobile x-ray devices. The modern design and high reliability of the materials used in production give the chance to devices to maintain the most severe service conditions for many years. Devices can be equipped with dosimeters for exact control of dose loads of patients.
Control panels of all mobile devices have intuitively clear interface. Visitor T4
Visitor T4 - unambiguously the best compromise from the point of view of obtaining the maximum quality of the image at limited investments. Power of a high-frequency monoblock - 4 kW, the maximum peak working voltage of 110 kV, lightweight - all this does to Visitor T4 demanded in rooms of imposing of plaster bandages and other clamps of an extremity, in offices of a trauma. The main specialization of this device - research of extremities.
Visitor T30Visitor T30 - the universal mobile device for a X-ray analysis, extremely convenient in maneuvers and positioning.
Power of the high-frequency generator - 30 kW, the maximum peak working voltage of 125 kV, a bifocal tube with the rotating anode, all this allows the device Visitor T30 to work in any area - both at a trauma X-ray analysis, and in pediatrics, orthopedics or for needs of surgery.
Connection of the device to a rack of pictures allows to carry out researches of a thorax or the lower extremity.
Visitor T30R - is the version of the device Visitor T30, with the column of a radiator turning on ±90 ° around a vertical axis. Even if the cart of the device costs between two beds - turn of a hand support allows to execute researches to patients on beds on the right and at the left.
Visitor T30DRIncrease in clinical opportunities
Visitor T30DR is a digital version of the device Visitor T30R. With the device the mobile digital flat panel detectors DRX-1 or VDX 1400 of a format of 35х43 cm are shared that corresponds to a standard survey picture and allows to execute research of any body. Dose load of the patient when using flat panel detectors is significantly lower, than when using cartridges with a film, at the same time the digital image appears on the screen in only a few seconds after an exposition and differs in high quality. 30 kW the generator and the maximum peak working voltage of 125 kV allow to use the device at any radiographic appendices. The detector transfers data to the workstation located in the device cart on a cable or a wireless way (depending on detector model).
Simplification of your work The image in only a few seconds appears on the inch touch screen integrated into the device 19 cart which serves for primary visualization of images and for control of the device, for the choice of parameters of an exposition. You are relieved of need to work with cartridges, to develop a film, to wait for results of development to understand whether laying was correctly executed. There is no risk of a mistake connected with the wrong entering of data of the patient as the device is connected with the workstation which obtains and stores data on the patient under the DICOM Worklist protocol. The image can be immediately transferred to the workstation of the doctor on a wireless network, and is sent to information network of MPI for storage in the PACS system further, or to the medical printer for creation of the firm copy. The device can be equipped with the dosimeter which not only highlights the received dose on the control panel, but also transmits this value to information network.
Visitor T30 M-DRMaximum convenience and ease of obtaining image
Visitor T30 M-DR - top model of our ruler - the digital mobile x-ray device with an electric motor.
Development of a modern electromoving platform allowed to create the maneuverable device not dependent on the power supply network. Both the movement and x-ray expositions are carried out independently at the expense of device accumulators.
The device allows to get into narrow passes between beds and to quickly position a radiator and the detector for research including thanks to the column of a radiator rotating on ±320 ° and to a telescopic support of the radiator.
Possibilities of the high-frequency generator of 32 kW / 125 kV - allow to carry out any radio graphic researches.
The motorized device is available also in the analog version (T30 M-R)