Buy MECHANICAL SCISSORS FOR Q11-6X2500 (6Х2000) METAL
MECHANICAL SCISSORS FOR Q11-6X2500 (6Х2000) METAL

MECHANICAL SCISSORS FOR Q11-6X2500 (6Х2000) METAL

In stock
Price:
1 UAH
For example: +380(50)123-45-67
Payment:
Shipping:
Ukraine, Kiev
(View map)
+380 
Display phones

Company rating

67% of positive reviews from 3
15
15 years on Allbiz
Technical characteristics
  • Country of manufactureTaiwan
Description

Scissors are available - only new!!! Call!!!

This equipment is used for the rectilinear machine cut sheet threw. The used material - steel with strength on the razryena more than 450N/mm2, and also other materials, including rubber, plastic, etc. Temperature of a goryacherezanny leaf should be no more than 50 Сº.При to a full load the machine can work only in the scraper of the single machine cut. In case of operation of the equipment for the material machine cut with bigger tensile strength, material thickness should be respectively reduced.

Distinctive features:

  1. The frame of the machine represents an all-welded design with good rigidity, compact leading dimensions and lightweight.
  2. The orbit of rotation of a knife beam is inclined to the supporting surface of the lower knife forward that provides the flat and smooth line of the machine cut. Lifting bolts of an upper knife provide line tuning for minimization of agnails and a fin on an edge of the cut-off material.
  3. The Vprizhimny device butterfly springs are used. Also on the pressing device of a pressing plate skewback inserts from sliding are used. Pressure is more, but it does not deform a poverkhnostmaterial.
  4. the machine drive through the closed, autonomous transmission which is built in directly the main shaft of the drive. Constructional execution of a transmission simple, well greased, with the low noise level and long term of operation.
  5. In the machine there is no coupling (capture) and a flywheel. It cuts by means of the direct drive magnetic the motor reducer. It reduces idle time of the engine and saves energy
  6. Front and back emphasis is equipped with a scale. The back emphasis is easily adjusted by the synchronization mechanism.
3. Specifications 6x2500 (6x2000)
1. Effort of the machine cut 180 kN
2. Maximum thickness of an otrezayemogolist 6 mm
Minimalnayatolshchina otrezayemogolist 1.2 mm
3. Ultimate tensile strength 450 N/mm2
4. Maksimalnayashirina of an otrezayemogolist 2500 mm (2000 mm)
5. Distance between racks 2910 mm (2410 mm)
6. Knife tilt angle 1 ° 45' (2 hail)
7. Course 88 mm (82 mm)
8. Frequency of the courses of a knife 40 cycles/min.
9. Speed of consecutive cutting with the maximum width of a leaf 24 cycles/min.
10. Maxims. machine cut length on a back emphasis 500 mm
11. Glavn. privodmodel Y132M:-4 h
Power 7.5 kW (5.5kvt)
Speed 144O RPM
12. Dimension. razmerydlina 3675 mm (3175 mm)
Width 1 76 5 mm
Height 1656 mm
13. Wedge-shaped rementip Bmm
Length 3048 mm
14. Total weight 5000 kg (4523 kg)
Shipping method
Payment method
Contact the seller
MECHANICAL SCISSORS FOR Q11-6X2500 (6Х2000) METAL
MECHANICAL SCISSORS FOR Q11-6X2500 (6Х2000) METAL
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0