- Country of manufactureUkraine
Basic maslostantion with giving 2 liters a minute. Depending on a complete set pressure can be adjusted in the range from 35 to 160 bars. In a set the three-position four-linear hydraulic valve with electromagnetic management, the index of level with the thermometer, a jellied mouth with sapuny, the drain filter.
General technical characteristics:
Purpose of a maslostantion
Description of work of the hydroscheme:
The electric motor (M) rotates the pump (N). The working liquid which is soaked up by the pump from a tank (B) via the filter mesh (F1) of a sleeve of high pressure moves in a working cavity of a product. Control of extreme pressure of a maslostantion is made by the safety valve (KP). The maximum working pressure of a maslostantion is 23 MPas. The hydraulic valve (R) is intended for management of work as a stream of hydraulic liquid. Switching of provisions of a zolotnik of the hydraulic valve an electromagnet is carried out from a box of management (the working provision "A" and idling of "B"). Return to neutral situation ("0") is made due to influence of an elastic element (spring). Pressure in system is controlled by the manometer (MN) (0... 40 MPas). On the drain line the oil filter (F2) is established. Pressure difference of working liquid before and after filters should not exceed 0,5 MPas. Pressure difference over admissible leads to an exit them out of operation. Working liquid is filled in in a tank via the jellied mesh filter (Federal Law). Liquid level in a tank and its temperature is controlled according to the help of the level gage (U).