- Profile- mm
The KAM EPI - 300 installation with the Start/Stop function is intended for drawing EPI glue system in the scraper of production of wooden/window laminated board with system of glue coating.
Main destination of this installation:
Pasting on face of lamels, in the scraper in productions of laminated constructional, wall and window board.
Structure of installation:
1. The glue coating node equipped with automatic system of tracking curvature of preparation and correction of provision of the putting comb;
2. Pumping plant with the precision corrosion - resistant pump and electronic control system;
3. Specialized roller conveyers (option) which scooters are supplied with rolling bearings.
Glue coating node with pressing system of transportation of preparation:
1. The under power shaft with notches;
2. Upper pneumatic device of clip of lamel;
Readjustment on height happens by change of height of comb with mechanical fixing in special grooves.
Readjustment on width happens by replacement of glue jets by stubs in comb. (In set there is the second replaceable comb)
Mixing of components and glue coating:
1) Glue head with function of tracking and leveling of roughnesses of preparation at glue coating;
2) Aluminum fast - folding comb with inserts from P. T. F. E. , allowing to make cleaning quickly and easily;
3) Mixing of components of EPI of system happens just before glue coating in the static mixer, amount of the mixed glue in system of installation no more than 75 grams.
4) Speed of glue coating is up to 120 mmin. This parameter can be changed upon the demand of the customer.
5) Glue dosage accuracy + / - 2% ;
6) Change of ratios of components glue EPI systems - from 100: 5 to 100: 20, discretization of change of ratio - 0,2% ;
7) Empty Lamel function.
The dosing precision corrosion - resistant pumps (Germany);
Adjustment of supply of glue is carried out by means of the controller and frequency converters with vector control system. At change of viscosity of glue, the pump torque is automatically adjusted that allows to pump over precisely set amount of glue + / - 5gr/sq. m), designated by technological process, leveling changes of its viscosity.
Adjustment and monitoring of parameters on the control panel is possible:
- Glue consumption;
- Preparation feed speed;
- Availability of glue in buffer capacity by means of the sensor;
The Start/Stop system and unlike the systems provided by other producers mixes glue just before drawing in the static mixer that allows to control precisely all temporary characteristics of glue system for receiving the strongest glue line, practically to exclude possibility of defects.
Installation is equipped with system "tracking curvature of preparation" and automatically adjusts positioning of size node over preparation, leveling its roughnesses.
Different adjustments of parameters by means of the control panel, and also adjustment of ratios of components by means of pumping plant are available.
Also, installation is equipped with the "empty lamel" function which allows not to apply glue in the automatic mode on the lamel determined by the account in the scraper.