Buy Installation forced-air and exhaust Vents Vut of 600 G
Installation forced-air and exhaust Vents Vut of 600 G

Installation forced-air and exhaust Vents Vut of 600 G

In stock
39760.11 UAH
Ukraine, Kharkov
(View map)
Technical characteristics
  • BrandVents
  • Country of manufactureUkraine
  • Productivity600 m³/h
Proizvoditel:vents (BEHTC)
Model: 00586
Existence: Is available

The BEHTC VUT forced-air and exhaust installation of 600 G with a productivity up to 2200 m3/h in the compact warm and soundproofed case.

The BEHTC VUT forced-air and exhaust installation of 600 G represents completely ready ventilating unit providing a filtration, supply of fresh air to the room and removal polluted, at the same time installation provides transfer of heat of exhaust air to stitched air through a lamellar recuperator. Are intended for connection with round air ducts.

Design of forced-air and exhaust installation: the case is manufactured of the aluminum shape and a sandwich panels with internal warm and sound insulation from mineral wool 20 mm thick.

For a filtration of stitched and exhaust air in installation there are two built-in filters with extent of cleaning of G4 (on an extract) and F7 (on inflow).

BEHTC VUT of 600 G is equipped stitched and exhaust with centrifugal fans of bilateral absorption with the shovels bent forward and the built-in thermostat of protection with automatic restart. Electric motors and driving wheels are dynamically balanced in two planes.

In VUT of 600 G the recuperator of cross current executed from aluminum plates is applied. For operation of installation without recovery the "summer" insert is provided. Under the block of a recuperator the pallet for collecting and removal of condensate is located. Forced-air and exhaust installation is completed with the built-in system of protection of a recuperator against frosting during the cold period of year.

The speed control of rotation of fans is exercised by means of the four-position switch allowing to choose the minimum, average or maximum speed or to switch off installation.

Forced-air and exhaust installation is mounted on a floor, suspended to a ceiling by means of an assembly corner with a vibroinsert or fastens on a wall by means of arms. Installation can be placed both in auxiliary rooms, and basically (behind a false ceiling, in a niche or an open way). It is possible to mount only in such situation to provide collecting and removal of condensate.

Dear clients, pay, please, attention to that fact that electric connection and installation have to be carried out according to the instruction and an electric circuit specified on a terminal box!

Technical characteristics:

The main
Producer VENTS
Country producer Ukraine
Weight 54.0 (kg)
Additional characteristics
Installation supply voltage, In/50 Hz 1 ~ 230
Maximum power of fans, W 2 pieces x 195
Current of fans, And 2 pieces x 0,86
Total power of installation, W 390
Total current of installation, And 1,72
Max. consumption of air, m3/h 600
Frequency of rotation, min.-1 1350
Level of sound pressure on rasst. 3 m, dB(A) 32-48
Speed. the moved air, °C from-25 to +55
Case material alyumotsink
Isolation 25 mm min. cotton wool
Filter: extract G4
inflow F7 (EU7)
Diameter of the connected air duct, mm 200
Efficiency of recovery to 85%
Recuperator type cross current
Recuperator material aluminum
D 199
In 416
B1 300
B2 54
B3 207
N 603
H1 230
H2 148
L 722
L1 768
Shipping method
Payment method
Contact the seller
Installation forced-air and exhaust Vents Vut of 600 G
Installation forced-air and exhaust Vents Vut of 600 G
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0