Buy Installation forced-air and exhaust Vents Vut of 300-1 G of the EU
Installation forced-air and exhaust Vents Vut of 300-1 G of the EU

Installation forced-air and exhaust Vents Vut of 300-1 G of the EU

In stock
Price:
37824.89 UAH
Payment:
Shipping:
Ukraine, Kharkov
(View map)
Technical characteristics
  • BrandVents
  • Country of manufactureUkraine
  • Productivity300 m³/h
Description
Proizvoditel:vents (BEHTC)
Model: 00597
Existence:
Is available

The BEHTC VUT forced-air and exhaust installation of 300-1 G of the EU with a productivity up to 600 m3/h in compact and zvuko-and the heatisolated case.

The BEHTC VUT forced-air and exhaust installation of 300-1 G of the EU represents completely ready ventilating unit providing a filtration, supply of fresh air to the room and removal polluted, at the same time installation provides transfer of heat of exhaust air to stitched air through a lamellar recuperator. Are intended for connection with round air ducts.

Design of the BEHTC VUT forced-air and exhaust installation of 300-1 G of the EU: The case is manufactured of the aluminum shape and a sandwich panels with internal warm and sound insulation from mineral wool 20 mm thick.

Filter: high extent of purification of stitched and exhaust air is reached at the expense of two built-in filters with extent of cleaning of G4 (on an extract) and F7 (on inflow).

Engine: The highly effective electronic motors switched (EU) with an external rotor are used. Such motors are the most advanced decision in the field of energy saving today. Motors are characterized by the EU
high efficiency and optimum control in all range of speeds of rotation.

In the VUT installation of 300-1 G Esprimenyaetsya the countercurrent recuperator executed from polystyrene plates. For operation of installation without recovery the "summer" insert is provided. Under the block of a recuperator the pallet is located
for collecting and removal of condensate. Forced-air and exhaust installation is completed with the built-in system of protection of a recuperator against frosting during the cold period of year.

Management: Modification of VUT of of the EU is equipped with the regulator of speed A2 (P-1/010). Control of installation in this case is exercised by means of a signal of 0-10 Century.

Installation: Forced-air and exhaust installation is mounted on a floor, suspended to a ceiling by means of an assembly corner with a vibroinsert or fastens on a wall by means of arms. Installation can be placed both in auxiliary rooms, and basically (behind a false ceiling, in a niche or an open way). It is possible to mount only in such situation to provide collecting and removal of condensate.

Dear clients, pay, please, attention to that fact that electric connection and installation have to be carried out according to the instruction and an electric circuit specified on a terminal box!

Technical characteristics:

The main
Producer VENTS
Country producer Ukraine
Weight 36.0 (kg)
Additional characteristics
Installation supply voltage, In/50 Hz 1 ~ 230
Maximum power of fans, W 2 pieces x 70
Current of fans, And 2 pieces x 0,60
Total power of installation, W 140
Total current of installation, And 1,2
Max. consumption of air, m3/h 300
Frequency of rotation, min.-1 1380
Level of sound pressure on rasst. 3 m, dB(A) 24-45
Speed. the moved air, °C from-25 to +60
Case material alyumotsink
Isolation 25 mm min. cotton wool
Filter: extract G4
inflow F7 (EU7)
Diameter of the connected air duct, mm 150
Efficiency of recovery to 95
Recuperator type countercurrent
Recuperator material polystyrene
D 149
In 420
B1 390
B2 100
B3 159
N 562
H1 215
H2 147
L 829
L1 876
Shipping method
Payment method
Contact the seller
Installation forced-air and exhaust Vents Vut of 300-1 G of the EU
Installation forced-air and exhaust Vents Vut of 300-1 G of the EU
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0