- Country of manufactureGermany
- Weight2,379 kg
- Number of modespcs.
The industrial heater of TYPE 7500 ELECTRONIC air is intended for use in various technological processes, on conveyors, in processing equipment.
Simple, reliable and rigid design with the steel case, without heater screen. Weight is 2,4 kg. Simple replacement of a heating element. For replacement - to turn off 4 bolts and to remove the heater case together with the filter. Food from a network of 220-230 V or 380-400 V or 440-480 V. Moshchnost of the heater is 5000 W or 7500 W or 10000 W. The electronic regulator of power of heating from zero to a maximum.
The design and materials of the industrial heater of TYPE 7500 ELECTRONIC air are calculated on heating of air to temperature not above 700 °C. It is obvious that air temperature at the exit from the heater is defined by three sizes:
• Cumulative power of spirals of the heater;
• Reference temperature of air;
• Air stream.
For example, if the stream of air of 550 l/min, and the regulator of power of heating is established on a maximum, then the 7500-watt heater will heat air on °C T=680. It means that if air temperature on an entrance to the heater is 20 °C, then at the exit from the heater - 700 °C. Thus, for the full 7500-watt capacity of heating minimum admissible stream of air - 550 l/min. At a bigger stream air temperature at the exit from the heater will be lower. At a smaller stream - it is necessary to reduce power, otherwise the heating element will quickly burn down. On the device nozzles with a landing diameter of 75 mm are established.
|Art. The 6000th model 7500 230 - 240 V, power is 5000 W|
|Art. The 6002nd model 7500 380 - 440 V, power is 5000 W|
|Art. The 6004th model 7500 380 - 440 V, power is 7500 W|
|Art. The 6005th model 7500 440 - 480 V, power is 10000 W|
|Sizes: length is 310 mm, width is 110 mm, height is 112 mm|
|Weight: 2.379 kg|
Scopes of application:
- Industry of packing
- Bottling of liquids