The press is intended for common industrial application when performing various operations of cold stamping: pieces, cuttings down, punched holes, are flexible, relief molding, etc. Have work sl.rezhima: 1. Adjustment mode. 2. Standard operating mode. 3. Avtomatichsky operating mode. 4. Strengthenings operating mode. In the mode of adjustment installation of trailer switches under various sizes of stamps is made. In the standard mode the press combines a single cycle by means of buttons or a pedal. In the automatic mode the press makes an infinite number of cycles. The strengthened mode is applicable during the stamping and volume stamping. At the same time the press develops the maximum pressure with endurance. The press is equipped with system of adjustment of pressure from minimum to face value. It allows to make control for the necessary pressure during the work with various equipment. The counter of cycles is installed. The size of the course is easily regulated by the provision of the konechnik arranged on photo cells. You can download technical data sheet on the website.
Development and production of the VTK company Odessa
| Technical characteristics | |
| Nominal force, hardware | 3 |
| Maximum course, mm * | 125 |
| Open shtamp.prostranstvo, mm * | 175 … 50 |
| Regulation size slave. course * | 125 |
| The minimum number of the working courses in min. at the max. course * | 26 |
| The minimum number of the working courses in 10 mm, min. at the course, * | 270 |
| Power of the electric motor, kW | 3 |
| Food, In | 380 |
| Volume of a tank, l | 70 |
| Overall dimensions, mm | 523х698х1568 |
| Net weight, kg | 345 |
| Weight gross, kg | 400 |
