Buy Hydraulic guillotine shears with ChPU of the DM-HMV CNC series of DENNER firm (Turkey)
Hydraulic guillotine shears with ChPU of the DM-HMV CNC series of DENNER firm (Turkey)

Hydraulic guillotine shears with ChPU of the DM-HMV CNC series of DENNER firm (Turkey)

In stock
Reconfirm the price with seller
For example: +380(50)123-45-67
Shipping:
Ukraine, Kiev
(View map)
+380 
Display phones

Company rating

67% of positive reviews from 3
15
15 years on Allbiz
Description

The DM-HMV CNC series with ChPU which manages 3 coordinates: the course of a back emphasis, adjustment of a tilt angle of knives and a gap between knives. A series is called DM-HMV CNC. ChPU Cybelec DNC 60 or ESA 525 is used. More expensive DM-HMV CNC series is offered in that case when the customer is going to cut on one machine both thin, and thick sheets, and from different materials (common steel, a stainless steel, low-carbon steel, titanium, etc.).

Standard complete set:

  • ChPU Cybelec DNC 60 (3 managed coordinates: the course of a back emphasis, a tilt angle of knives, a gap between knives);
  • back emphasis on the screw nut of swing of 1000 mm;
  • cut of a bed - 350 mm;
  • capacity of a tank of a hydraulic system - 200-550 l;
  • quantity of hydraulic clips of a leaf - from 15 to 37 pieces;
  • setup of width of the machine cut;
  • illumination of the line of the machine cut;
  • submission of the sheet on the smooth directing blocks of a table of the machine;
  • machine knives: upper with 2 cutting edges, the lower knife with 4 cutting edges;
  • adjustment of a tilt angle of knives from ChPU;
  • gap adjustment between knives from ChPU;
  • front barrier of safety for the operator's hands;
  • back safe barrier of a working zone of a back emphasis;
  • Tee guide of a leaf on the left side of a table (1 m) and 2 frontal guides of a leaf (1 m).

Additional complete set:

  • system of support of the cut-off parts of a leaf from the machine back;
  • device of miter cutting;
  • Tee guide of a leaf on the left side of a table of the machine + frontal guides of a table 2 and 3 m long.
Machine model Width and thickness of a leaf, mm Tilt angle of knives, hail. Machine dimensions *), mm, and mass of the machine, tons P dvig., kW / max. number of machine cuts, mines
DM-HMV 3106 3120 x 6 0,5-2,0 3725х2100*х1850 / 6,5 tons 11 kW / 15-18/mines
DM-HMV 3110 3120 x 10 0,5-2,5 3745х2500*х2050 / 9,8 tons 22 kW / 13-16/mines
DM-HMV 3113 3120 x 13 0,5-2,5 3765х2665*х2100 / 12,0 tons 30 kW / 13-16/mines
DM-HMV 3116 3120 x 16 0,5-2,5 3785х2800*х2200 / 15,0 tons 30 kW / 11-14/mines
DM-HMV 3120 3120 x 20 0,5-2,5 3805х2950*х2570 / 20,5 tons 37 kW / 5-8/mines
DM-HMV 4106 4160 x 6 0,5-2,0 4870х2100*х1850 / 7,5 tons 22 kW / 9-12/mines
DM-HMV 4110 4160 x 10 0,5-2,5 4890х2500*х2050 / 11,0 tons 22 kW / 9-12/mines
DM-HMV 4113 4160 x 13 0,5-2,5 4910х2665*х2100 / 13,0 tons 30 kW / 9-12/mines
DM-HMV 4116 4160 x 16 0,5-2,5 4930х2800*х2200 / 21,0 tons 30 kW / 7-10/mines
DM-HMV 4120 4160 x 20 0,5-2,5 4950х2950*х2570 / 27,0 tons 37 kW / 5-8/mines
DM-HMV 6106 6300 x 6 0,5-2,0 6910х2450*х2780 / 22,0 tons 11 kW / 11-14/mines
DM-HMV 6110 6300 x 10 0,5-2,5 6930х2480*х2780 / 25,0 tons 22 kW / 7-10/mines
DM-HMV 6113 6300 x 13 0,5-2,5 6950х2500*х2780 / 28,0 tons 30 kW / 7-10/mines
DM-HMV 6116 6300 x 16 0,5-2,5 7000х2550*х2780 / 33,0 tons 30 kW / 5-8/mines
DM-HMV 6120 6300 x 20 0,5-2,5 7000х2550*х2780 / 35,0 tons 37 kW / 3-6/mines
Shipping method
Contact the seller
Hydraulic guillotine shears with ChPU of the DM-HMV CNC series of DENNER firm (Turkey)
Hydraulic guillotine shears with ChPU of the DM-HMV CNC series of DENNER firm (Turkey)
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0