- Country of manufactureItaly
MAIN TECHNICAL CHARACTERISTICS
|Productivity||1 000 - 25 000 l/hour|
|Operating pressure||150 - 300 Bars|
|Working temperature||to + 90 0C|
|Quantity of steps of homogenization||2|
|REQUIRED PRESSURE OF AIR||Min. 4,5 bars|
|REQUIRED PRESSURE OF WATER||Min. 1,5 bars|
|PRODUCT PRESSURE ON THE ENTRANCE||Min. 2 bars|
|PRODUCT PRESSURE AT THE EXIT||To 10 bars|
|Protection class||IP 55|
|TYPE OF CONNECTION WITH PIPELINES||DN (the SMS, Tri-Clamp - on demand)|
TECHNICAL SPECIFICATION ON THE HOMOGENIZER
The compression head is produced by uniform node from AISI 316 stainless steel, checked by ultrasound.
Plungers (3 it is uniform.) are made of stainless steel of the AISI 316 brand, become covered with chrome and are polished.
The design of inlet and final valves corresponds to the processed product.
The safety valve - spring type, is installed in compression head, is easily available to service.
The pressure transmitter - analog type, is equipped with the gate-type membrane valve in hygienic execution.
All mobile parts of transmission are located in the cast metal body.
The drive is carried out through mechanical reducer.
For management of consumption of water and air the pneumatic system is used.
Greasing of nodes and mechanisms is carried out under pressure. Adjustment of pressure of oil is made from the front panel of the car. For cooling of oil it is provided water maslyanny radiator.
The cooling system is equipped with the safety electrovalve, turning off water supply at car stop.
Nodes of the car are mounted on steel frame. Outside panels are made of otglyantsovanny stainless steel of the AISI 304 brand.
On the control panel the regulator of operating pressure, buttons of start-up and stop, light indicators are located.
Electric components of the car are mounted in the steel, protected on norms IP 55, the body which is installed in the car.
The control unit and protection of network is manufactured according to norms 98/37/SEE and mounted in the body from stainless steel. Includes all electric components (the PLC installation is possible).
THE EQUIPMENT INCLUDED IN STRUCTURE OF THE HOMOGENIZER:
· 2nd step of homogenization;
· Pulsation dampers, joining node - the DIN 11851/52 type (on demand - the SMS or Tri-Clamp type), pulsation pressure - to 20 bars. Is established both on entrance, and on product yield, allows to avoid vibration of pipelines and the equipment;
· Z / parts on 4000 business hours.
THE POSSIBLE OPTIONS ESTABLISHED AT THE REQUEST OF THE BUYER:
· Automatic control of Pressure 1 Step;
· Automatic control of Pressure 2 Step.
Device of regulation of productivity.