- Country of manufactureUkraine
Light filling, ready to application, for external and internal works.
- High adhesion to the basis.
- Facilitated - thanks to as a part of ceramic microballs.
- It is easily put and ground.
- Well levels rough surfaces.
- It can be applied as starting filling to filling of roughnesses and hollows in rooms.
- Moisture resistant, is suitable for application in the conditions of the increased humidity.
- Does not contain cement.
- Quickly dries.
- Convenient in work: does not try to keep step with the pallet, does not hammer the grinding tool.
Maximum thickness of a layer:
Maximum size of particles:
For a partial and continuous shpatlevaniye of surfaces before drawing a finishing covering. Also it is recommended for alignment, filling of small roughnesses, deepenings, a covering of heads of screws. The leveled surface can be painted or pasted over with wall-paper. For internal and external works.
Types of surfaces:
Mineral bases (concrete, plaster, plaster), gypsum cardboard.
Preparation of a surface before a shpatlevaniye
The Shpaklyuemy surface has to be dry and carefully cleared of the exfoliating material, the fragile disappeared covering, vysol, dirt, dust, fat and oils. For full removal of an old covering, and also strong pollution washing under pressure or sandblast cleaning is recommended. Fittings and other metal elements have to be cleared of a rust and are covered with an anticorrosive primer (paint). Surfaces often humidified and subject to formation of a mold before painting have to be processed by means of Biotol E or Biotol Spray. Earlier painted surfaces completely to clear by means of a scraper, brushes with a rigid bristle, the construction hair dryer or means for removal of old OPS 10 paints and varnishes; to process glossy surfaces an emery paper to dullness. Previously to process the porous and strongly absorbing surfaces Aquastop Facade soil according to the instruction for application.
To put manually with the pallet. To carry out works at a temperature of air and the basis +5 °C are not below. The second and the subsequent layers of filling to put after drying of previous. After drying to grind a zashpatlevanny surface an emery paper to the required smoothness level.
About 1 m ²/l at a continuous shpatlevaniye and thickness of a layer of 1 mm depending on a way of drawing and type of a surface.
2-24 hours at 20 °C and relative humidity of air of 50%. Time of drying depends on thickness of a layer, temperature and humidity of air.
Cleaning of tools:
Right after use to wash out water. The dried-up filling is purified mechanically.