Buy Hard putty Heatwaterproofing HTS-243, 15 kg
Hard putty Heatwaterproofing HTS-243, 15 kg

Hard putty Heatwaterproofing HTS-243, 15 kg

In stock
630 UAH
For example: +380(50)123-45-67
Ukraine, Zhitomir
(View map)
Display phones

Company rating

67% of positive reviews from 3
9 years on Allbiz
It is intended for creation of a mineral layer of thermal insulation, and also alignment of a surface of walls and a ceiling in rooms with the high level of humidity (a bathroom, kitchen, a bath, the pool, etc.), and also on a building facade.

Expense - 2,25 kg/sq.m. at a layer of drawing 3 mm.

Type of substance: paste

Basis - cellulose air.


Creates a heat-insulation layer (heat conductivity of 0,05-0,07 W / m*k)

High adhesion to the basis.

Simple in application.

Does not demand time for preparation.

Does not contain acryle (temperature of application and storage-20 … +50 gr C).

Does not burn.

Good vapor permeability.

Method of application

Hard putty cannot be dissolved with water or other solvents.

To put with the pallet a uniform layer 1-3 mm.

Walls and ceiling before drawing need to be cleared, to remove fatty, mineral and organic pollution by means of the HTS-222, HTS-223, HTS-224 detergents, to put a primer HTS-249.

The quantity of layers of hard putty is unlimited (to put the following layers in a day after drying of the previous layer).

The dried hard putty layer easily is ground.

It can be applied as adhesive to gluing of polyfoam, other heat-insulating plates and also as a basis for a sticker of wall-paper of all types, colourings by all types of varnishes and paints, putting decorative plaster.

Safety measures

When drawing to exclude contact with open parts of a body, hit inside. At hit in eyes and a mouth - to wash out water.

Storage and transportation

Warranty period of storage - 36 months.

Container: bucket of 15 kg

Practical recommendations.

Heat-insulating hard putty can be applied on any surfaces (plaster, a stone natural, a brick, wood, metal, polymers, glass, ceramics), including on surfaces with high fluctuation of temperatures, for example heating systems, industrial refrigerators and furnaces,

It is convenient during creation of a water heat-insulated floor (for reduction of losses of heat) that, in case of leakages of system to avoid flooding of neighbors from below.
Shipping method
Contact the seller
Hard putty Heatwaterproofing HTS-243, 15 kg
Hard putty Heatwaterproofing HTS-243, 15 kg
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0