- Country of manufactureUkraine
Nonshrinking acrylic filling, ready to application, for internal works.
- Excellent adhesion to the basis is convenient in drawing.
- Possesses the fine filling and leveling properties.
- Thickness of a layer is 1–3 mm.
- Quickly dries, it is easily ground.
- Forms ideally smooth white surface.
For a partial, sutural and continuous shpatlevaniye of surfaces before drawing a finishing covering. Also it is recommended for alignment, filling of small roughnesses, deepenings and seams of a surface. It is not necessary to apply in the places subject to water influence.
Types of surfaces for a shpatlevaniye:
Mineral bases (concrete, plaster, plaster), gypsum cardboard, wood.
Preparation of a surface:
The surface has to be pure, dry and firm. Any pollution, peeling, wall-paper, the fragile showered sites and substances reducing adhesion of filling to the basis (dust, fats, lubricant oils, the ave.) needs to be removed carefully. To clear the surfaces infected with a fungus, a mold, etc. with application of means of Biotol or Biotol-Spray according to the instruction for application. To process porous surfaces before a shpatlevaniye a primer of TM Aura or TM Eskaro Aquastop, according to the instruction for application.
To put manually with the pallet. To carry out works at a temperature of air and the basis +5 °C are not below. The second and the subsequent layers of filling to put after drying previous. After drying to grind a zashpatlevanny surface an emery paper to the required smoothness level.
About 1 l/m ² at a continuous shpatlevaniye and thickness of a layer of 1 mm depending on a way of drawing and type of a surface.
4 hours at a temperature of +20 °C and relative humidity of air of 65% depending on layer thickness; full drying — about 24 hours. At other temperatures and humidity time of drying can change.
Cleaning of tools:
Right after use to wash out water. The dried-up filling is purified mechanically.