Fire-resistant Penosil sealan

PENOSIL Premium +1500 oC Sealant - Fire-resistant sealant of 310 ml

Sealant on the basis of silicates intended for use at high temperatures.

Consolidation of seams and filling of cracks. After warming up weight will become dark gray and maintains

temperature to +1500 °C. Is suitable for application in contact with a natural stone.

Scopes of application

Works on warming and sealing in the places demanding resistance to high temperature.

Consolidation of seams and filling of cracks in chimney pipes, furnaces, fireplaces, plates.

It is linked to metal, stone, brick and concrete surfaces. At

contact with metal be careful as under the influence of temperature metal

"plays", and sealant does not.

Application conditions

Temperature of application is from +5 °C to +40 °C. To clear the connected surfaces of fat, oils,

raise dust also the lagged behind particles. Nonporous surfaces should be cleared solvent and pure

cotton rags without fibers. To remove the remains of solvent before its evaporation pure dry

rag. Very porous surfaces need to be moistened a little at first. After final

slowly to warm up hardenings to +250 °C to avoid formation of vials of air inside

masses. It is not recommended to use in mobile connections and in contact with extending

under the influence of temperatures and the decreasing materials. The product which did not pass roasting not

is waterproof, spreads in a wide seam. Is not suitable for coloring.

Instruction for application

To clear the connected surfaces of fat, oils, dust and the lagged behind particles. Nonporous

surfaces should be cleared solvent and pure cotton rags without fibers. Remains

solvent to remove before its evaporation with a pure dry rag. Very porous surfaces it is necessary

at first to moisten a little.

310 ml plastic cartridge: A cartridge tip with a carving to cut off and wind on it

tip for the direction of sealant. To cut off a tip of a tip so that it was formed

opening, suitable for sealant dispensing. To establish a cartridge together with a tip in

the gun and to fill a tip to sealants, pulling repeatedly the trigger.

To squeeze out sealant in a seam, constantly and evenly pressing a trigger of the gun and

smoothly carrying out by a nozzle along a seam. After putting sealant to smooth it with the pallet or

the rubber pallet for silicone. To clean excess sealant.

After final hardening slowly to warm up up to +250 °C. After warming up weight will become

dark gray and superfirm.

Cleaning

For removal of the unconsolidated sealant it is possible to use the rag moistened with water or

PENOSIL Premium Cleaning Wipes cleaning wipes. To delete the hardened sealant only

mechanically.

Specifications

Property	Unit	Value
Time of formation of a film	Minute	3-4
Hardening speed	mm / 24 h	1-2
Density	DIN 53479-B) g/cm ³	2,04
Properties of the hardened sealant
(Hardness (on Shora And) (ISO 868) before heating		75±5
Mobility (ISO 11 600)	%	±0
Temperature stability	˚C	to +1500

The specified parameters are received at a temperature of +23 °C and relative humidity of air
50%.
Color - black.
Packing: Plastic, the boss of 310 ml, 12 pieces in a box.
Storage
The guaranteed period of storage of 12 months from the date of production at storage in hermetically
to the closed original packing in the dry place at a temperature from +5 °C to +30 °C, at
to transportation about -5 °C are short-term. Not to store near naked flame or a source of heat.
Safety
In a usage time of a product to provide sufficient ventilation. To store in inaccessible
for children place. To avoid hit of chemical on skin and in eyes. At hit of a product in eyes
at once to wash out a large amount of water and to see a doctor.
It is possible to handle the hardened silicone sealant without any risk for health.
Detailed information on safety is available on the card of safety (SDS).