- Country of manufactureUkraine
- Protection rating1Ех
Ambient temperature at operation from -40 °C to +40 °C for U1, from -60 °C to +40 °C for HL1, from -20 °C to +60 °C for TZ.
DESIGN: Case details from an aluminum alloy. Glass heat-resistant with tight seal in a ring. The socket of parts of the lamp — carving. A grid — steel, a reflector from sheet steel. Equipment of management built-in. There are executions with two omental inputs for an electrocable. Class of protection against defeat by electric current of I in accordance with GOST 12.2.007.0
LIGHT SOURCES: Gas-discharge lamps: metalhalogen DRI-100 type; sodium DNAT-70 type, DNAT-100-1 1 _=178mm (Poltava ZGRL); mercury DRL-80, DRL-125 type. A socle — see the table. And also other lamps with similar electric parameters and overall dimensions.
INSTALLATION: Individual connection — on the vertical pipe SZ/4-V or a vertical assembly profile. Transit connection — on a hook, a vertical or horizontal assembly profile or a pipe with the outer diameter of 25 … 28 mm.
The recommended installation height: Z … 5 m, for lower rooms are recommended to modification-431,-631.
DELIVERY SET: Lamp. The lamp is delivered by the separate order.
individual compensation of jet power gives high power factor, not less than 0,85;
the input knot (introduction office) is reliably connected to the case by means of the steel carving plug (an insulator through passage) which provides not only durability of a design, but also preservation of parameters of a carving explosive crack during all service life;
input of wires in a blast-tight cover is executed by a filling method a compound;
corrosion-resistant materials of case details (aluminum alloy and paint and varnish covering) provide long service life;
high degree of protection of optical system and the equipment of management allows to keep stable electric and lighting parameters throughout all term of operation;
existence of two omental inputs for an electrocable gives the chance of transit electroconnection to the line without additional expenses on cable and electrotechnical installation.