Buy ENAMEL ML-165 HAMMER
ENAMEL ML-165 HAMMER

ENAMEL ML-165 HAMMER

Products from producer
In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
Seller
Russia, Chelyabinsk
(View map)
+7(9 
Display phones
Less than 1 year old on Allbiz
Quickly responds
Technical characteristics
  • BrandФестПро
  • Country of manufactureRussia
Description

ENAMEL ML - 165 HAMMER

 

 

GOST 12034 - 77

Purpose: Hot - drying enamel, used for protective and decorative painting of various devices and metal products used in atmospheric conditions of various climatic regions and indoors, when exposed to temperatures up to 130 ° C. Enamel forms a patterned (hammer effect) high - quality coating, with high elasticity, strength, adhesion to the substrate and high protective properties.

Composition: It is a suspension of pigments in solutions of alkyd and melamine - formaldehyde resins and organic solvents with the addition of silicone fat and targeted additives. Does not contain lead compounds and active solvents.

Specifications:

Indicator name

Norm according to GOST 6631 - 74

1. Coating color

various colors, including the RAL catalog, other colors - at the request of consumers

2. Drying time to degree 3 at a temperature of 120 ° C, min, no more

60

3. Recommended coating thickness, microns single / double layer

25 - 30 / 50 - 60

5. Recommended number of layers

1 - 2

6. Nominal viscosity according to the VZ - 246 viscometer with a nozzle diameter of 4 mm at a temperature of (20.0 + 0.5) ° С,

50 - 100

Mass fraction of non - volatile substances, % depending on color

47 - 54

Grinding degree, micron, no more

15

Hiding power of the dried film, g / m2

40 - 100

Flexural elasticity, mm, no more

3

Film strength upon impact on a U - 1 device, cm, not less

45

Film hardness according to the pendulum device of the TML type (pendulum A), rel. units, not less

0.21

Coating adhesion, points, no more

one

Film gloss, % , not less

58

Film resistance at a temperature of (20 + 2) оС to static action of liquids, h, not less:


water

 

36

 

Material preparation: Before use, the enamel is thoroughly mixed using a mixing mechanized device according to GOST 9980.2 until a homogeneous state. The working viscosity is adjusted with xylene. If necessary, the enamel is filtered through a 01N - 02N mesh in accordance with GOST 6613. In the cold season, the enamel must be preheated to a positive temperature.

Surface preparation:

 The surface preparation technique and the characteristics of the paint system are determined by the technical regulations for the performance of work, agreed with the material manufacturer.

Coating system:

The enamel is applied to steel or aluminum surfaces previously primed with VL - 02 or AK - 070 primers in one or two layers 25 - 30 microns thick each. This coating retains its decorative and protective properties in temperate climates for at least 3.5 years.

Application method: Airless and pneumatic spraying, mainly in an electrostatic field.

Colors: Standard: gray, gray - silver, bluish - gray, black, red - beige, gray - beige, gray - blue, gray - green, green, protective, red - beige, gray - beige.

Drying time : One layer 25 - 30 microns thick. dries in 60 minutes at a temperature in a drying chamber at a temperature of 120 ° C. Natural drying is possible with the introduction of special catalysts.

Precautions: Observe the general safety rules applicable to work with flammable liquids.

Shelf life: 5 months at temperatures from - 40 to + 40 ° C.

Packing: Drums 57L, 25L.

Contact the seller
ENAMEL ML-165 HAMMER
ENAMEL ML-165 HAMMER
Shipping method
Payment method
Compare0
ClearSelected items: 0