- Country of manufactureUkraine
- ColorBronze color
Designed for painting steel and cast iron surfaces with rests of tightly held rust, used in atmospheric conditions (metal structures, garages, fences, lattices), and indoors. Can be used as a universal enamel for painting wooden surfaces. Recommended for painting in preschool, educational, as well as in medical and preventive institutions.
Apply by brush, roller or spray.
Drying time at + 20 ° C and 65% relative humidity.
Dust is from 5 to 7 hours.
The next coat can be applied after 24 hours.
Attention!As the temperature decreases and the relative humidity of the air increases, the drying time may increase. Resistance to chemical agents
Resistant to turpentine, white spirit, methylated spirit.
Resistance to chemicals. Withstands vegetable and animal fats, lubricating oils and greases.
Storage and Transport
Withstands storage and transport at low temperatures. Store in a sealed, tightly closed container.
Instructions for use
surface must be dry. The temperature of the air and the surface to be painted should be above + 5 ° C, and the relative humidity of the air - less than 80%.
Attention!With a decrease in temperature and an increase in the relative humidity of the air, the drying time may increase.
new or previously painted metal surface sanded to remove dust and residues from a loose cover and loose rust, dirt, oil and other contaminants, degreased with acetone or solvent
Before use, rusty STOP enamel primer must be mixed thoroughly, if necessary diluted with white spirit or solvent Than 10% by weight of the enamel. Apply to the prepared surface by spraying, brushing or roller (velor or fur-trimmed synthetic), carefully staining the irregularities, corners and edges. To ensure protective properties under atmospheric conditions and longer term protection, it is recommended to apply at least three layers of enamel.
After finishing work, clean tools with white spirit, solvent or solvent No. 646.