- Country of manufactureUkraine
Acrylic enamel for radiators.
- Vodorazbavimy semi-gloss enamel.
- Maintains temperature to +120 °C of dry heat.
- Keeps a high whiteness, wear resistance and elasticity.
- Forms the strong covering resistant to repeated washing (1 class of wear resistance on DIN EN 13300).
- It is not softened under the influence of the increased temperatures.
- Quickly dries.
- Contains inhibitor of instant corrosion.
- Good adhesion to various types of surfaces, including to old alkidny.
- The covering gains final resistance to washing in 4 weeks.
- Has no unpleasant smell.
For decorative and protective coloring of the grounded or earlier painted radiators and elements of systems of heating. It is recommended for coloring of the grounded or earlier painted metal surfaces, and also wooden, mineral surfaces and gypsum cardboard in dry and damp rooms. Well is suitable for coloring of window slopes.
Types of surfaces under coloring:
The grounded or earlier painted metal radiators and elements of systems of heating. Other metal surfaces grounded or earlier painted by water and dispersive, alkidny or oil and phthalic paints. Wooden surfaces: lining, doubling boards, chipboard, etc. Mineral surfaces: filling, plaster, concrete bases, etc. Gypsum cardboard, DVP, wall-paper under painting.
Preparation of a surface before coloring
The surface has to be cleared of the exfoliating paint, dirt and dust, is fat-free, dry. Metal surfaces have to be grounded by the corresponding primer. To process the surfaces which are earlier painted by oil or alkidny paint an emery paper to dullness. In need of roughness of a surface to zashpatlevat and ground the corresponding materials. To ground new wood the corresponding primer and to grind an emery paper.
Before application to mix enamel. To put with a brush, the roller or a spray (including an airless way) in 2 layers. If necessary for drawing the first (priming) layer enamel can be diluted with water of no more than 5% on volume. To carry out works at a temperature of air and the basis is not lower +5ºС. Coloring warm (to +45 °C) radiators is allowed. To put the second layer of enamel not earlier than in 2 hours after drawing the first. Attention! The covering gets the final durability (resistance to wet attrition) in 4 weeks after putting enamel. The covering gains final color after enamel drying.
Machine kolerovka on the Eskarocolor system – more than 8 000 shades in pastel (base A) of tone. Manual kolerovka TM Aura pigmentary pastes.
6-10 m ²/l on one layer. The consumption of enamel depends on type and preparation of a surface.
30 minutes - from dust. The following layer can be put in 2 hours at a temperature of +20 °C and relative humidity of air of 65%. Drying time respectively increases at a temperature below +20 °C.
Brush, roller, spray.
Cleaning of tools:
Right after use to wash out water. The dried-up enamel is purified mechanically.