- Country of manufactureUkraine
Wearproof paint for wooden surfaces.
- Acrylic enamel.
- Perfectly covers a surface.
- Forms a strong, wearproof covering with high decorative characteristics.
- Possesses excellent spreadability – when drawing by a brush forms a smooth equal covering without strips.
- Does not turn yellow over time, does not crack.
- The painted surface maintains repeated damp cleaning with use of detergents.
- The maintenance of LOS in a product corresponds maximum permissible for subgroup of 4/d-130 g/L (2010).
- semi-gloss (about 70) on EN 13 300.
- semi-gloss (about 70) on ISO 2813.
1 class on EN 13 300 (ISO 11998).
For coloring of the new or earlier painted wooden surfaces (window frames, doors, a plinth, furniture details, other elements of an interior, doubling boards) and the grounded metal details in rooms. It can be applied to coloring of walls and ceilings in rooms with constantly high humidity and high operational requirements. Coloring of the wooden and grounded metal products which are operated out of the room is possible in the absence of aggressive atmospheric actions (for example, under a canopy, on a terrace, in a loggia). Is not suitable for coloring of floors.
Types of surfaces under coloring:
Wooden surfaces, surfaces from concrete, a gas concrete, the plasterboard plates grounded by a chipboard, DVP; the brick, zashpatlevanny, plastered, and also grounded or earlier painted metal surfaces.
Preparation of a surface before coloring:
The painted surface has to be fat-free, cleared of the exfoliating paint, dirt and dust, dry. Strongly polluted or fat surfaces to wash out 3-5% soda solution, then to rinse with water and to dry up. To process the surfaces painted by earlier alkidny or oil paint an emery paper to dullness. Earlier painted metal surfaces carefully to smooth out, remove a rust, the remains of old paint and to process anticorrosive soil. Previously to process new metal surfaces an anticorrosive primer.
Before application carefully to mix paint. To put in 1-2 layers.
6-10 m ²/l.
At a temperature + 20 °C and relative humidity of air of 65% in 1-2 hours the covering dries from dust, is ready for drawing the following layer in 4-5 hours. At decrease in temperature and increase in humidity drying time respectively increases. The painted window frames and doors can be closed densely in 24 hours.
Care of the painted surface:
The covering gains final wear resistance approximately in 4 weeks - during this time handle with a surface with care until it gets the final hardness and wear resistance. If necessary the surface can be subjected to easy cleaning with a soft sponge or rag approximately in 2 days after drawing. For washing of the painted surface we recommend to use water, neutral and average alkalinity detergents (rn to 9). Not to use organic solvents, abrasive cleaners, and also rigid sponges and brushes. The strong friction can make a surface glossy. For removal of a mold we recommend to use Biotol and Biotol Spray.
Brush, the roller, airless spray (a nozzle 0,013" - 0,018").
Cleaning of tools:
Upon termination of works to wash out water with soap.