- Country of manufactureRussia
EDMU-6 distant-reading manometer.
This price is valid at payment for SP. At payment on Ltd company to cost the VAT - 18% will increase
Manometers electric remote EDMU-6 are intended for remote monitoring of excessive pressure of liquids in systems of fuel feeding, lubricant and cooling of internal combustion engines, and also can be used in other systems where remote monitoring of excessive pressure of nonaggressive liquids and gases is required.
On resistance to influence of temperature and humidity of an ambient air manometers correspond to group of execution D3 in accordance with GOST 12997 and have execution of UHL or execution In, category of placement 3 in accordance with GOST 15150, but for work at a temperature from minus 60 to plus 75 ° C for the receiver and from minus 60 to plus 60 ° C for the index.
On security from environmental activity the index should have degree of protection of IP53, and the receiver – IP55 in accordance with GOST 14254.
The upper limit of measurements of manometers owes 0,6 (6) MPas (kgf/cm2).
Supply voltage of a direct current, B 27.
The current intensity consumed by manometers should not exceed 0,15 A.
Limit of the allowed main error, in % of an upper limit of measurements ±4.
When completing manometers at the consumer from the receivers and indexes received separately a limit of the allowed main error of the manometer of ±6% of an upper limit of measurements.
The variation of indications of manometers should not exceed an absolute a value of a limit of the allowed main error.
Length of the connection cable between the receiver and the index on the route no more than 60 m.
EDMU-6 manometers should be steady against impact of vibration with a frequency of 20 - 80 Hz with an amplitude no more than 1 mm at acceleration to 100 m / с2 – for receivers and 15 m / с2 – for indexes.
Manometers should maintain influence of 2000 blows with acceleration of 100 m / с2 pulse width of 10 - 15 ms.
The mass of manometers should be no more than 1,1 kg. P-6-N. It is intended for remote monitoring of excessive pressure of liquids in systems of fuel feeding, lubricant and cooling of internal combustion engines, and also for remote monitoring of excessive pressure of nonaggressive liquids and vapors. It is used with the index of the EDMU-6 manometer from 0 to 6kg/cm2. Available, in a warehouse.