- Country of manufactureUkraine
- Combustion chamber designOpened
- Installation methodFloor standing
This model is chimney and for your convenience and safety is completed with the effective wind-shelter device (wind speed to 20-25m/c). It provides protection of an ignition torch against inflating through a flue.
Non-volatility - very important factor today. All AOGV models are non-volatile, i.e. do not depend on electricity.
Also for your convenience the model is equipped with the thermometer for visualization of temperature of the heat carrier and the tight combustion chamber of gas.
This AOGV model for your convenience at will can be attached on a wall or is left on a floor or on a special rack under AOGV.
The heated area makes also 100 sq.m.
|The heated area, sq.m||to 100|
|Rated power, kW||10|
|Efficiency at the rated power, % not less||92|
|Type of gas||natural|
|Nominal pressure of gas before the main torch during the work of a copper on natural gas||1274|
|Nominal pressure of gas before the main torch during the work of a copper on the liquefied gas||-|
|Consumption of natural gas at the rated power, sq.m/hour, no more||1,1|
|Heat carrier temperature in the heat exchanger||90/40|
|Fluctuations of temperature of the heat carrier from set, °C||±5|
|Nominal working pressure of the heat carrier in the heat exchanger, bar||0,7|
|Type of the combustion chamber||open|
|Withdrawal of products of combustion||natural draft or forcibly|
|Index of carbon monoxide, % about., no more||0,05|
|Productivity on GVS at At= °C, l/min. *||3,9 *|
|Water pressure in a contour of GVS (max./min.), bar *||6 - 0,25 *|
|Dimeter of a flue, mm||115|
|Entrance and exit of a contour of heating, inch||1 1/2|
|Entrance and exit of a contour of GVS, inch *||½*|
|Gas supply, inch||1/2|
|Weight in packing, kg||46/48 *|