Currency UAH
Dehumidifier of RDX-04 Germany buy in Sumy

Dehumidifier of RDX-04 Germany

Share   ID: 1196622:15335266

  • Country of manufactureGermany
  • Type of dryerConvective drying

Dehumidifiers of the RDX series with a productivity of 0,4 - 18,0 m ³ / mines are made on the basis of effective lamellar (the RDX - 04 models to RDX - 18) or cast aluminum (the RDX - 24 models to RDX - 180) the heat exchanger with a vstoyenny koalestsentny separator of condensate.

Low loss of pressure thanks to the built - in separator, and reliable external isolation of the heat exchanger promote high energy efficiency of system.

The Koalestsentny separator is not sensitive to pressure differences at changeable loading and reliably separates up to 98% of the condensed moisture.

Functional features

  • The highly effective heat exchanger with low losses of pressure
  • High efficiency at low energy consumption
  • Ecologically safe R134a/R404a coolant
  • Constant low value of a dew point
  • Effective moisture office in a separator irrespective of loading
  • Compact design
  • Idle time in commissioning
  • Convenient operation and service


The combined heat exchanger three in one

The heat exchanger of dehumidifiers of RDX consists of three functional blocks: Heat exchanger air/air; Heat exchanger air/coolant; Koalestsentny separator of condensate. The heat exchanger air/air makes preliminary cooling of hot compressed air. It saves up to 50% of energy at the subsequent process of cooling with coolant. Along with it cold dry air, leaving a dehumidifier, heats up to temperature accepted for the subsequent operation. The heat exchanger air/coolant brings temperature of compressed air to dew point temperature. The Koalestsentny separator deletes condensate from compressed air. The separated condensate periodically is dumped by a kondensatootvodchik.




Productivity * , (m3/min. )  0,4
Max. working pressure, MPa  1,6
Max. temperature of compressed air on an entrance to a dehumidifier, a hail. With + 55
Max. ambient temperature, °C  + 45
Temperature of a dew point, °C  + 3
Coolant type  R134a
Amount of coolant, kg  0.16
Accession  G1/2" female thread
Power supply  1/230В 50 Hz
Power, W  125
* - you see the table of recalculation of productivity below

All calculations at design and production of dehumidifiers are given to nominal

(standard) conditions. According to ISO 7183 those are: working pressure 0,7mpa, ambient temperature   is + 25 °C, temperature of compressed air on an entrance to a dehumidifier of + 35 °C. That is, at selection of a dehumidifier  use of the correction coefficients considering a difference between nominal and real conditions is required.

Using these coefficients when calculating of the required dehumidifier, we receive that actual productivity P will be equal:

É = R nominal x F1 x F2 x F3. 


We recommend to see
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0