Buy Crusher hammer SMD-112A
Crusher hammer SMD-112A

Crusher hammer SMD-112A

Products from producer
Custom order
Price:
100 UAH
Shipping:
Ukraine, Kiev
(View map)
Technical characteristics
  • BrandООО "ВОСТОК ГИПРОМАШ"
  • Country of manufactureUkraine
Description

Crusher molotkovy one-rotor SMD-112

The crusher is intended for crushing of soft and fragile materials which strength of 125 MPas at compression and with the humidity which is not allowing to cover grid-iron lattices, rock salt, saltpeter, plaster, glass, coal, limestone, etc.

With the increased humidity the crusher can be applied to materials with the removed grid-iron lattices. For adjustment of a gap between a grid-iron lattice and hammers the eccentric mechanism is used.

Distinctive feature of these crushers is high efficiency, simplicity of a design, small power consumption, good extent of crushing.

Principle of action of a crusher: through a loading opening material moves in the crushing camera a uniform layer where it is exposed to bystry blows of the alternating hammers of the rotating rotor, there is crushed and dumped through koloskovy lattices on previously standing receiver or the conveyor down. The crusher in a basic equipment on a rotor has three rows of hammers, but the rotor can be both two-row, and six-row, everything depends on characteristics of crushed material.

The maximum productivity is reached by the continuous stream of material which is evenly distributed on all length of a rotor.

For production of the splitting-up hammers and grid-irons manganic steel 110G13L is used. Lattices between grid-irons are established in relation to rotor radius with a bias at an angle of 45 degrees towards of the movement of material for reduction of a possibility of a contamination of cracks. Between grid-irons the size of a crack can be reduced to 2,5 mm, everything depends on requirements to the size of fraction at the crusher exit.

Technical characteristics

Productivity, m3/h To 15
Size of parts of an initial product, mm To 150
Humidity of initial raw materials, % No more than 8
Diameter of a rotor, mm 600
Length of a rotor, mm 400
Size of a grinding, mm 0 - 15
Rotor drive:

electric motor power, kW

22
Frequency of rotation, rpm 1250 - 1500
Weight, t 1,4
Overall dimensions, mm:

length

width

height

1020

1000

900

Shipping method
Contact the seller
Crusher hammer SMD-112A
Crusher hammer SMD-112A
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0