Correctly – the detachable I-6119 submachine gun for editing and cutting of a wire with a diameter of 1,6 - 8,0 mm
- Customer pickup,
- In detail
- Country of manufactureUkraine
- Type of machine feedContinuous
- Availability of CNCNo
Model for editing and cutting of a wire with a diameter of 1,6 - 8,0 mm from revolt. High efficiency at the expense of a high speed of giving (16 - 120 m/min).
Correctly - the detachable automatic machine is intended for editing of metal of round section with a diameter of 1,6 - 8,0 mm from revolt and its cutting on bars of measured length from 100 to 6000 mm.
The automatic machine governs metal with a temporary resistance up to 800 MPas and a limit of fluidity to 500 MPas.
The automatic machine consists of the rotating correct frame, roller giving and a lever cutter.
From the unwinding device the end of a wire goes to the giving rollers of the forward feeder. With the help rychazhno - the eccentric mechanism of a clip, the clip of the giving rollers is carried out, providing thereby giving of a wire in crackers of the correct frame.
Editing of material is carried out in all planes by its repeated plastic bend by the correct crackers established in nests of the fast - rotating frame.
After editing of material in the correct frame the wire moves through conductings in the giving rollers of the back feeder.
The corrected wire site via the detachable plug which is not movably fixed in the feeder case moves to the closed trench of the reception tray against the stop adjusted at the required length of the cut - off core then it is cut off.
On the machine frequency converters for stepless change of speeds of giving of the main engine and the correct frame are installed.
|Diameter of a wire, mm||1,6 - 8|
|Speed of giving, m/min||16 - 120|
|Frequency of rotation of the correct frame, mines - 1||2500 - 5000|
|Length of the cut - off metal, mm||100 - 6000|
Overall dimensions in mm:
|Length, width, height||2100х950х1330|
|Lump (with the added equipment), kg||2365±2%|