Products of other enterprises
- Country of manufactureCzech Republic
- Boiler typeClassic
Hercules U22C is intended for combustion of coke, coal and wood in the universal way. Advantage of a copper are low requirements to smoke draft, and also the design checked by years — more than 200.000 coppers are established not only in Europe, but also in other countries of the world. As additional fuel under certain conditions it is possible to use wood spill, shaving, sawdust, wood granules or briquettes. It is also possible to use pieces of wood with humidity to 25%. In that case power will be not much less. The copper can be used for systems with natural and compulsory circulation of heating water.
- durability of the heat exchanger from the Czech cast iron
- years the checked copper design
- possibility of combustion of wood of povysshenny humidity (20 ~ 25%)
- low requirements to smoke draft
- vozmozhnst the self-flowing mode - cooling of lattices with water
- easy installation of a copper thanks to carving flanges
- possibility of switching of a copper in gas or liquid fuel
- The closed systems of heating with compulsory circulation of the heat carrier. Use of the protection device from an overheat of REGULUS DBV 1-02 (option), or the cooling coil of VCHE (option) is recommended. Use of the reducing valve on a supply of the cooling water to the protection device from an overheat of REGULUS DBV 1-02 is obligatory. The complete set the thermostatic valve with the submersible sensor of temperature, for example, of WATTS STS 20 or Honeywell TS 130 is necessary for work of the cooling coil of VCHE.
- The closed systems of heating with heat-retaining capacities and compulsory circulation of the heat carrier.
- Gravitational systems of heating of the closed and open type. Possibility of use as a reserve copper.
- Possibility of alteration from a solid propellant copper, in a copper for work with dutyevy torches on gas or liquid fuel and back. For modernization replacement of a door of a copper with the flange established in it is necessary for a torch and acquisition of a set of the translation (option) - including the control panel a torch and additional parts of the heat exchanger.
- The section one-pass heat exchanger from cast iron.
- Combustion of fuel happens by a burn-out method.
- Efficiency of burning of different types of fuel is provided with a combustion chamber design with use of primary air and with a possibility of supply of additional air and system of the cooled pig-iron grid-irons.
- The door of an ashpit of a copper is supplied with an adjustable throttle for supply of primary air. In a door of loading of fuel the opening for adjustment of supply of additional air is placed.
- Frontal loading of fuel through the increased loading window in the combustion chamber.
- The thermomanometer in the control panel on the top panel of a copper.
Functions of automatic equipment:
- Automatic smooth adjustment of power direct-action thermomechanical regulator.
- Work of a copper is independent of the electric power.
- Working pressure of a contour of heating: maximum 4,0 bars.
- Heating contour temperature: minimum 60ºC, maximum 90ºC.
Packing and complete set:
- Coppers are delivered with completely assembled cases, without the mounted thermal insulation and facing.
- Facing and thermal insulation are delivered in a cardboard box.
- Technical documentation and set of delivery are enclosed in a fire chamber of a copper (see the instruction).
- Packing type - the wooden pallet — polyethylene - a coupler packing tapes.
Contact the seller
Copper heating solid propellant VIADRUS HERKULES U 22 C 2