Difmanometr are intended to DM3583 for transformation of a difference of pressure during week-end the unified signal of mutual inductance with linear dependence.
Difmanometra are intended to DM-3583M, DMT-3583M2 for transformation of a difference of pressure to the output unified signals of a direct current with linear dependence.
Converters are used in monitoring systems, regulations and managements of technological processes at measurement: a consumption of liquid, gas or steam on a difference of their pressure in the narrowing devices; differences of vakuummetrichesky or excessive pressures; liquid level on pressure of the hydrostatic column which is under atmospheric, excess or vakuummetrichesky pressure.
The DMT-3583M, DMT-3583M2 converters have the increasing characteristic of an output signal.
The DMT-3583M converters consist from:
DM-3583M converter; the block of transformation and linearization of BPL which can be one - (BPL-1k) or two-channel (BPL-2k) and to work, respectively, with one or two DM-3583M converters.
Difmanometr of DMT-3583M2 represents the DMT-3583M converter in which components (DM-3583M and BPL-1 to) are executed in uniform construct.
|Name of parameters||Value of parameters|
|1||Top nominal limits of measurement, kPa||1,6; 2,5; 4,0; 6,3; 10; 16; 25; 40; 63; 100; 160; 250; 400; 630|
|2||Maximum permissible working excessive pressure, MPa||16; 25|
0-5; 0-20; 4-20
|4||Limit of the admissible given main error of transformation, %||±1
|±1||±1 for diapaz. 1,6-16 kPa;
±0,5 for diapaz. 40-630 kPa
|6||Power consumption, VA||1,5||10-||10|
Service conditions: temperature, °C
relative humidity to, %
|from minus 30 to plus 50
from plus 5 to plus 50
|8||Overall dimensions, mm
|180 X 192 x 302;