- Country of manufactureGermany
- Weight1,4 kg
- Power consumption3000 W
- Productivity450 l/min
- Frequency current50 Hz
The construction VENTO-H hair dryer belongs to a series of Vento hair dryers. From similar (on the power and appointment) HOT AIR S and TUBE-Hot thermohair dryers differs in the unattended and durable asynchronous electric motor without graphite brushes. The VENTO-H electric motor with the modern optimized system of windings differs in higher density of energy, than the ordinary asynchronous electric motor. It allows to remove big power from rather small and easy motor. The electronic regulator of the device VENTO-H provides smooth control of power of heating and air temperature. The built-in protection against an overheat switches-off the heater in case of a spiral overheat - for example if to block an air stream below an admissible limit. The screen around the case of the heater protects the operator from a burn at an unintentional contact.
Main options of use of the VENTO-H thermohair dryer:
• Welding of awnings of PVC, polymeric fabrics, tarpaulins with an overlap at repair of auto-awnings and shelters, canopies, advertizing banners, roofing membranes.
Accessories: flat nozzles (art. F4003, F4004, F4002), silicone rollers (art. F7001, F6997 or F7000, F6998 or F7006, F6995 or F7002, F6996), knife half moon (art. F7010). For automation and increase in speed at production of autoawnings - it is better to use the automated self-propelled FORPLAST-P2 or FORPLAST welding machines. The hairdrier is irreplaceable for repair of auto-awnings, canopies, advertizing banners or roofing coverings.
• Welding of the pressurizing or reinforcing tape to films, fabrics, tarpaulins.
Accessories: flat nozzle of 40 mm (art. F4003 or F4004), the silicone roller from a guide for a tape (F7000, F6998 plus F6999) or the silicone roller of 80 mm (an art. F7002, F6996), knife half moon (art. F7010). For automation and increase in speed at large volumes of welding of a tape - it is better to use the automated self-propelled FORPLAST-B50, FORPLAST-B70 or FORPLAST-R welding machines. However VENTO-H is and still irreplaceable for inevitable small manual operations many times cheaper.
• Heating of the thermoseated tubes, couplings, small packing.
Accessories: round thermoshrinkable nozzle of 15 mm (art. F4005), flat thermoshrinkable nozzle of 20х5 mm (art. F4006), thermoshrinkable reflector (art. F5016). Nozzles for VENTO-H are suitable only for heating of the thermoseated tubes, couplings and small products. For heating of the thermoseated film of the big area and the large thermoseated packing it is better to use VENTO-Grand.
|Heater power||3000 W|
|Air heating temperature||20-700 °C, besstupenchato changeable|
|Landing diameter under a nozzle
|Noise level||<70 DB|
|Electrical protection||II/(double isolation)|
Scopes of application:
- Covers for cars
- Production of awnings for cars
- Tarpaulin covers
- Advertizing banners
- Roofing sector
- Waterproofing of pools
- Waterproofing of ponds
- Floor coverings
- Production for rest
- Automobile industry
- Synthetic materials
- Boiler installations
- Auto repair shops
- Printing houses