- Country of manufactureGermany
- Weight1,2 kg
- Power consumption1500 W
- Productivity250 l/min
- Frequency current50 Hz
- Number of modespcs.
The construction QUICK-S Electronic hair dryer belongs to a series of Soft hair dryers. From similar (on the power and a form of the heater and to destination) TUBE-Quick and VENTO-Quick thermohair dryers differs in ergonomic design, convenience of replacement of graphite brushes and lower price. The electronic regulator of the QUICK-S Electronic hair dryer provides smooth control of power of heating and air temperature. The built-in protection against an overheat switches-off the heater in case of a spiral overheat - for example if to block an air stream below an admissible limit. The electric motor - with increased till 1500 o'clock (!) resource of graphite brushes. The new design of graphite brushes excludes damage of a collector by a spring after wear of a brush. Replacement of graphite brushes takes seconds, for replacement it is not necessary to disassemble the device case. The screen around the case of the heater protects the operator from a burn at an unintentional contact. Easy and perfectly balanced design of the device QUICK-S Electronic with the ergonomic handle allows is long to work without fatigue.
Main options of use of the QUICK-S Electronic thermohair dryer:
• A stitching, or a tack of rigid constructional details without application of a bar for welding. It is applied to fixing of sheets and profiles before welding by a bar or before extrusive welding.
Accessories: round nozzle of 5 mm (art. F4000) or carving adapter (art. F4007), a nozzle for a stitching (an art. F5015 or F5004).
• Welding by a bar from rigid thermolayers - PND, software, N-PVH (viniplast), ABS, PVDF and so forth. It is applied to manual welding of sheets, welding of PVC of coverings for industrial floors, profiles and other constructional details.
Accessories: round nozzle of 5 mm (art. F4000) or carving adapter (art. F4007), nozzles of fast welding for a round bar (an art. F5010, F5011, F5012 or F5005, F5006, F5007), nozzles of fast welding for a triangular bar (an art. F5013, F5000, F5001, F5014 or F5008, F5002, F5003, F5009), knife half moon (art. F7010).
• Welding by a cord from soft thermolayers - P-PVH (plastic compound), PVD, etc. It is applied to manual welding of linoleum. For automation and increase in speed of hot welding of seams of linoleum at large volumes of laying of linoleum - it is better to use the automated self-propelled FORPLAST-F welding machine though it is absolutely other money. However the hairdrier for welding of linoleum is irreplaceable for an inevitable jobbing when laying linoleum, and also for repair of cuts. QUICK-S Electronic - the most convenient hair dryer for linoleum welding.
Accessories: threefold nozzle (art. F4001), the roller for a soft bar (an art. F7005), a cutting torch for jointing (an art. F7011), knife half moon (art. F7010), device for Gratas's cutting (art. F5021).
• Repair of awnings, canopies, roofing membranes, advertizing banners. Because of the small power of heating at QUICK-S Electronic for large volumes of manual welding of films it is with an overlap better to use more powerful construction HOT AIR S hair dryer.
Accessories: flat nozzle of 20 mm (art. F4002), flat nozzle of 40 mm (art. F4003), the flat punched nozzle of 40 mm (an art. F4004), silicone roller of 45 mm (art. F7001, F6997 or F7000, F6998 or F7006, F6995), knife half moon (art. F7010).
|Heater power||1500 W|
|Air heating temperature||20-700 °C, besstupenchato changeable|
|Landing diameter under a nozzle
|Noise level||<70 DB|
|Electrical protection||II/(double isolation)|
Scopes of application:
- Covers for cars
- Production of awnings for cars
- Tarpaulin covers
- Advertizing banners
- Roofing sector
- Waterproofing of pools
- Waterproofing of ponds
- Floor coverings
- Production for rest
- Automobile industry
- Synthetic materials
- Boiler installations
- Auto repair shops
- Printing houses