- BrandKG Elektronic
Command controller of the Polish production KGElektronik SP-05 LED with the touch display is intended for management of process of burning of the solid propellant coppers working at any kind of solid fuel. The block of SP-05 LED automatic equipment controls process of operation of the circulation pulser of a central heating, and also operates the air fan by optimum air supply in the set parameters depending on a type of fuel. The command controller allows to choose one of five functional settings depending on the used fuel and like a solid propellant copper.
Before operation of automatic equipment it is necessary to establish heat carrier temperature at the exit from a copper which needs to be supported, and also to choose an operating mode in the menu (F):
F1 tree and coal (smooth power blowing)
F2 tree (power of an obduv of 20% + purge)
F3 coal (power of an obduv of 50% + purge)
F4 sawdust (power of an obduv of 100% + purge)
F5 own settings.
The F1-F4 modes have already established temperatures of turning on of pumps, power of a podduv of the fan, time between produva, etc. Temperature between inclusion and switching off of the fan pays off automatically using algorithm of "control smart".
The F5 mode allows to establish the personal settings, according to need, i.e. it is possible to configure all settings: temperatures of turning on of pumps, speed of turns of the fan, break and time of a purge and td.
At the switched-on thermostat the regulator, after achievement of necessary temperature indoors, will pass into the support mode, only the purge will work.
Also in settings of the control unit it is possible to choose fan type:
1 - WPA 120 fan
2 - DP-01, DP-02 fan
3 - RV-14 fan
4 - DP-120 fan
- European quality
- simplicity of installation and operation
- economy of fuel consumption
- support of comfortable temperature condition indoors in the presence of the room thermostat
- the automated control of process of operation of the TsO circulation pulser and fan.
|Technical characteristics of the control unit|
|Emergency thermostat||90 °C|
|Kindling time||from 0 to 99 min.|
|Dimensions||150mm/90 mm / 60мм|
|Range of the set temperatures||TsO 35 to 80 °C|
|Range of measurement of temperature||0 to 99 °C|
|Length of cables of food||m pump TsO-1,5, m fan-1,5, m network-1,5|
|Length of wires of the sensor||0,6 m|
|Loading at the exit of the pump TsO and fan||6A|
|Supply voltage||230/50gts +/-10%|
|Having rummaged in a purge||from 1 to 15 min.|
|Electricity consumption||2 W|
|Purge duration||from 0 to 90 with|
|Ambient temperature||- 10 to 50 °C|
|Fading temperature||from 20 to 75 °C|
|Automatic equipment type||Electronic|
|Equipment type||Copper with manual supply of fuel|