Capillary and hydrophobic, mineral and opaque front paint on the basis of silicone pitch
- Customer pickup,
- In detail
- PurposeFor outdoor applications
- Paint typeSilicone
- Degree of brillianceFrosted
Paint with decisive advantage: integrally related quartz nanostructures form a dense and strong three-dimensional quartz lattice for protection against dirt and allow facades to remain pure longer.
The special combination of silicone pitch and binding means provides the vapor-permeable front covering protecting from a rain and highly for plasters and the mineral bases.
It is applied also as a repair layer on strongly keeping coverings by silicate and opaque aqueous emulsion inks, plaster on the basis of synthetic pitch and on the intact heat-insulating systems.
AmphiSilan-Plus unites in itself advantages of aqueous emulsion inks and classical silicate paints. These properties allow to use AmphiSilan-Plus also on the protected historical objects and on plaster with high content of lime.
- Not thermoplastic,
- with low internal tension,
- does not form a film,
- creates a capillary and active dry zone,
- passes CO2,
- steady against influence of the aggressive substances polluting air,
- contains special dyes with photocatalytic action.
Standard production: 12,5 l
ColorExpress: 1,25 l; 2,5 l; 7,5 l; 12,5 l.Color
AmphiSilan-Plus paint is tinted manually by means of full-tone AmphiSilan paints. At a kolerovka manually to mix all necessary amount of material among themselves in order to avoid differences of color shades.
At acquisition of 100 and more liters of paint of one shade by means of one order on demand the kolerovka at plant is also made. AmphiSilan-Plus restrictedly is tinted in also machine way in the ColorExpress system in all widespread shades. For identification of possible errors of kolerovka it is recommended to check shade accuracy before a covering. On integral surfaces to apply only shades of one party.
Glossy intensive shades under certain circumstances have low covering ability. Therefore when using such shades it is recommended to put previously intermediate covering layer of a comparable pastel shade on the basis of white paint. The second intermediate layer can be required.
Light resistance according to No. 26 BFS Instruction:
The strengthening AmphiSilan-Putzfestiger primer
Full-tone AmphiSilan-Volltonfarben paints Remark At a kolerovka insignificant deviations in technical parameters are possible.