- Country of manufactureRussia
Calpeda pump NM 65-16 CB
|Passport at the pump|
Centrifugal pumps Salpeda NM are used to increase the pressure in the network of cold and hot water supply for domestic and industrial use. The design of the pumps Salpeda NM-cantilever monoblock with horizontal suction pipe, horizontal shaft and vertical pressure outlet. Pumps Salpeda NM are single-stage, cantilever-monoblochnymi. In a special performance Salpeda NM pumps can be used for pumping liquids with abrasive impurities, seawater and aggressive liquids: oil products, grades, acetone and alkali.
Centrifugal monoblock pumps with direct connection engine-pump and a common shaft.
Pump casing with axial suction pipe and upper radial feeding socket-basic dimensions and technical characteristics in accordance with EN 733.
Pumping clean liquids, not corrosive for materials and do not contain abrasive particles of pump (solids content Max. 0.2%).
Use in the household and industrial sectors.
Use in fire protection installations.
The use of district heating installations, air conditioning, cooling and circulation.
& #8212-maximum final pressure in the pump casing: 10 bar.
& #8212-continuous mode of operation.
& #8212-liquid temperature from -10° to +90° c.
& #8212-ambient air temperature not more than 40° c.
& #8212-Nanometricheskaja suction lift is not more than 7 m.
The characteristics of the installation
- Appointment For water supply
- Power, kW 5.5
- Head, m 33.5.22
- Capacity, m3/h 48.120.
- Warranty (months) 60
- Weight, kg 70