C-GKP-50-25 muffler plate channel

Use of lamellar silencers for ventilation C - GKP - 50 - 25

Plate silencer for ventilation C - GKP is used for protection from the noise of the serviced apartments and to reduce the noise coming from the fans outside. Duct Silencers are used in rectangular ducts indoors. Silencers are used as elements of intake and exhaust systems. The air must be free of solid, sticky or corrosive contaminants.

Design features silencers channel plate C - GKP - 50 - 25

Housing and enclosures silencer vent plates are made of galvanized steel. The plates are filled with sound - absorbing mineral wool with a protective coating to prevent blowing of the fibers. The standard length of the muffler housing for all sizes of 1000 mm. On request, silencers may be provided in the housing of a different length (preferably a multiple of 500 mm). For outdoor installation, they must be further protected by a casing that prevents moisture ingress (casing is made further, special order). Mostly plate silencer C - GKP installed between the fans and the main duct. In exhaust systems of mechanical ventilation silencers are used for protection against shumaobsluzhivaemyh premises, and to reduce the noise coming from the fans outside. Installation of sound attenuators is carried out irrespective of the spatial orientation, while maintaining performance. Before silencer plastichatym channel C - GKP is recommended to install a straight portion of the duct length of at least 1, - 1, 5 m, this measure is necessary to equalize the air velocity over the cross section of the duct. several attenuators can be used to further reduce noise levels, arranged one after the other.