9 years on Allbiz
- Weight350, 360, 405 kg
BT1,5-0,3/150 HIGH-PRESSURE COMPRESSOR (W 1,5-0,3/150)Are intended for forcing of air in cylinders and maintenance of pressure from 80 to 150 kgfs/cm2 in them.
W 1,5-0,3/150 ARE APPLIED:
• for start of the diesel-electric set;
• for providing industrial facilities with compressed air;
• as a part of oil drilling installations.
The compressor is put in action from the electric motor via the gum sleeve. Compressor piston, three-stage. Circulating lubrication under pressure from the gear pump. Cooling liquid on the closed contour.
THE AUTOMATIC CONTROL SYSTEM AND PROTECTION PROVIDES:
• start-up at pressure reduction in system to 80 kgfs/cm2;
• stop at achievement of pressure in system of 150 kgfs/cm2;
• emergency stop at: - exceeding of air temperature;
• increase of air pressure in system to 170 kgfs/cm2;
• pressure reduction of air in system to 60 kgfs/cm2;
• pressure loss of oil is lower than admissible size.
TECHNICAL DATAS OF BT1,5-0,3/150
|Name of parameter||Value of parameter|
|BT1.5-0.3/150A1||BT1. 5-0.3/150A2||BT1. 5-0.3/150AZ|
|initial,||kPa||from 60 to 107|
|final excessive,||kgf/cm2||1 50|
|under the terms of suction,||m3/min.||0.3|
|on compressed air,||l/min||2|
|Electric motor power,||kW||7.5|
|Shaft speed of the compressor,||RPM||960|
|Control of the compressor||manual||automatic||automatic|
|Completeness of delivery||without automatic equipment devices without control panel||with devices of automatic equipment and control panel||with automatic equipment devices without control panel|
Similar company products
Contact the seller
BT1,5-0,3/150 high-pressure compressor (W 1,5-0,3/150).