The hydraulic briquette press of RUF-1500 makes briquettes of 260 x 100 mm in size in section (against 150 x 60 mm in younger models). Length of a briquette of 90 - 140 mm depending on installations and a type/size of the bricketed material.
The press of RUF1500 has productivity to 440 briquettes an hour or about 1150-1350 kg/h (depending on fraction and density of material) /
The pressing part of a briquette press and its hydraulic drive are mounted on the bearing frame having elastic damping support. Execution of a press right-hand - its pressing part and the loading bunker are on the right. The case of electroautomatic equipment is located on a frame and integrated into a press. The electrical wiring of a press is mounted completely, a cable are laid in protective trays. The press is ready for operation right after connection to the power supply network and system of supply of material.
The press and system of electroautomatic equipment in standard execution are designed and made for operation at ambient temperature from +5 °C to +40 °C.
The press is equipped with the loading bunker volume pribl. 310 liters. The bunker is supplied with a mixer for prevention of lag of material in the bunker and the loading screw with the driving electric motor.
Before delivery from manufacturer, the press passes 20 hour test run regarding identification of possible shortcomings with use as the bricketed material of wood sawdust. Except for a small amount of the purchased accessories, all details and knots of a briquette press were developed and made on RUF GmbH. Design, production and assembly are completely carried out at plant in of Zaisertshofen, Germany...