BP-10 power supply uni
- 734.02 UAH/pcs - from 2 pcs
- Customer pickup,
- In detail
- Country of manufactureRussia
- Weight0,5 g
- Size50*50 mm
- Wattage10 W
- Output Power10 W
- Type of currentAC
- Power cable length1 m
The BP-10 power supply unit is intended for food by the stabilized current 45ma +/-5% of the electronic coordinating device (the converter of an inductive signal in current) the block of the BD-10 sensor used in executive MEO, MEOF mechanisms and mechanisms of the alarm system of situation MSP-1.
The scope of the BP-10 power supply unit is the GSP component of mechanisms of electric one-reverse MEO, MEOF and mechanisms of the alarm system of situation MSP-1 for power supply of current sensors.
The block consists of a payment of the basis, the forward panel and a casing. On the forward panel two terminal blocks for connection of the block to external chains, and also the grounding screw are located. Terminal blocks are closed by covers. The block is calculated on installation on the vertical or horizontal plane. Position in space on an object any. Fastening of the block is carried out by two screws which are installed on the forward panel of the block
Power supply of the block
the single-phase alternating current main with a rated voltage of 220B with a frequency of 50 Hz. Supply voltage tolerances from nominal +10%/-15%.
Output parameters of the block
the rated stabilized direct current on loading to 1 kOhm 45ma + / _ 5%;
the maximum power consumed by the block at a rated load should not exceed 8 W.
Specify urgent cost in managers.